...
- Power up board at 12 V and 1.7 A current limit.
- Attach a Xilinx dongle to J32.
- Run impact.
- Right click on FPGA icon and select "Add BPI/SPI flash".
- The file to download is AdapterTest_00000003.mcs
- Select BPI PROM 28F00AP30.
- Right click on the prom icon and select program.
- After programming you can power down the board and quit impact.
- The rest of the procedure has to be done for each adapter board.
- Add a jumper to JP2 and JP5 (two center pins).
- Mount stand-offs.
- Attach the adapter board to the HSIO.
- Attach a USB cable to J30 (GP).
- Power up the board, again at 12 V and 1.7 A.
- Bring up the serial connection at 115200 Baud with logging of the output to file.
- Push the COLD-BOOT button on the HSIO and follow the instructions on the screen for testing.
- Once the test finishes successfully, quit the serial connection.
- Upload the logfile to the confluence page for this adapter board.
...