Page History
...
and then configure PlotAnalyze as follows:
[TimeTool.PlotAnalyze]
tt_get_key = TSS_OPAL # or whatever the input key is for TimeTool.Analyze to find the camera frame
tt_put_key = TTANA # or whatever the output key, put_key is for TimeTool.Analyze
fignumber = 11 # starting matplotlib figure number, change to not interfere with other figure numbers you may be using
pause = 1 # set to 0 to go through events without pause, otherwise module stops each time the laser is on
Module Check
a module that retrieves results from the event for either the above module or from data recorded online.
...
Overview
Content Tools