...
SLIC crashes on approximately 1 in a billion events. This bug is believed to be resolved in v7.
HPS-
...
EngRun2015-[SVTPosition]-v0
First version of engineering run geometry. The SVTPosition is either "Nominal" (+/- 1.5 mm to active sensor) or "Open" (+/~ 7mm to active sensor).
- Based on HPS-Proposal2014-v9
- B-field is box dipole of By=-0.25T (applicable for 1.1 GeV)
HPS-ECalCommissioning-V3 (with and w/o fieldmap)
Official geometry for the Decembers 2014 ECal commissioning run
- As designed ECAL with asymmetric top/bottom gaps
- no SVT!
- B-field of -0.33T (in y)
Working geometry for 2014 run studies. Changes will be announced on the hps-software list; you should rerun SLIC on all your data after any change since old data may not work with up-to-date versions of readout sim/analysis/reconstruction.
- SVT rotated 30.52 mrad around target; single sensors for layers 1-3, double sensors with double readout (unganged) for layers 4-6
- ECal flange face at z=1318 mm and photon hole aligned at 30.52 mrad from target
- Front face of ECal crystals is z=1393 mm; ECal aligned so the 30.52 mrad photon beam intersects centerline of ECal at its front face
- All dead material defined using Geant4 primitives: SVT vacuum chamber, ECal flange and vacuum chamber (with honeycomb)
- Uniform magnetic field extending from z=-8.28 to 99.72 cm
- Vacuum (zero density) planes at z=15 cm, same shape as standard SVT layers; hits are saved for charged particles passing through these planes (for use in recoil electron studies)
- Vacuum (zero density) planes at magnetic field boundaries; hits are saved for all particles passing through these planes
- Vacuum (zero density) planes just downstream of the ECal flange; hits are saved for all particles passing through these planes
HPS-Proposal2014-v8 (three versions with different B-fields)
- Based on HPS-Proposal2014-v7
- Added the ECAL crystal support structure in front of the crystals.
- Added the ECAL cooling plates and pipes.
HPS-Proposal2014-v9-2pt2
- HPSTracker2014 geometry type with millipede-friendly parameters
HPS-TestRun-v3
Official geometry for 2012 test run as-built.
...