Page History
...
| Code Block | ||||
|---|---|---|---|---|
| ||||
NEW | WHERE IT WAS IN OLD SCHEMA OR NOTES
----------------------------------------+---------------------------------------------------------
/Data
/Data/EpicsConfig
/Data/EpicsConfig/BEAM:LCLS:ELEC:Q /Configure:0000/Epics::EpicsPv/EpicsArch.0:NoDevice.0/BEAM:LCLS:ELEC:Q
/Data/EpicsConfig/Attenuator_transmission /Configure:0000/Epics::EpicsPv/EpicsArch.0:NoDevice.0/Attenuator_transmission
/Data/Config
/Data/Config/Control * a standard source name, not an alias *
/Data/Config/Control/AliasConfig /Configure:0000/Alias::ConfigV1/Control
/Data/Config/Control/ControlDataConfig /Configure:0000/ControlData::ConfigV3/Control
/Data/Config/Control/EvrIOConfig /Configure:0000/EvrData::IOConfigV2/Control
/Data/Config/Control/PartitionConfig /Configure:0000/Partition::ConfigV1/Control
/Data/Config/EBeam * a standard source name, not an alias *
/Data/Config/EBeam/BldDataEBeam /Configure:0000/Bld::BldDataEBeamV7/EBeam
/Data/Config/Opal_1 * this is a Daq Alias for XppEndstation.0:Opal1000.1 *
/Data/Config/Opal_1/TimeToolConfig /Configure:0000/TimeTool::ConfigV2/XppEndstation.0:Opal1000.1
/Data/Config/Opal_1/FrameFexConfig /Configure:0000/Camera::FrameFexConfigV1/XppEndstation.0:Opal1000.1
/Data/Config/Opal_1/Opal1kConfig /Configure:0000/Opal1k::ConfigV1/XppEndstation.0:Opal1000.1
/Data/Config/cs140_0 * also an alias *
/Data/Config/cs140_0/CsPad2x2Config /Configure:0000/CsPad2x2::ConfigV2/XppGon.0:Cspad2x2.0
/Data/Config/evr0 * alias *
/Data/Config/evr0/EvrConfig /Configure:0000/EvrData::ConfigV7/NoDetector.0:Evr.0
/Data/Config/evr1 * alias *
/Data/Config/evr1/EvrConfig /Configure:0000/EvrData::ConfigV7/NoDetector.0:Evr.1
/Data/Config/MyTimeToolConfig * special alias from user, soft link to Opal_1/TimeToolConfig
/Data/Config/NH2-SB1-IPM-01/IpimbConfig /Configure:0000/Ipimb::ConfigV2/NH2-SB1-IPM-01
/Data/Config/NH2-SB1-IPM-01/IpmFexConfig /Configure:0000/Lusi::IpmFexConfigV2/NH2-SB1-IPM-01
/Data/Config/XppEnds_Ipm0/IpimbConfig /Configure:0000/Ipimb::ConfigV2/XppEnds_Ipm0
/Data/Config/XppEnds_Ipm0/IpmFexConfig /Configure:0000/Lusi::IpmFexConfigV2/XppEnds_Ipm0
/Data/Config/Event/L3TConfig /Configure:0000/L3T::ConfigV1/Event
/Data/Run
/Data/Run/Config
/Data/Run/Config/noSrc/mykey # if a user did configStore().put(myndarray, 'mykey') during beginrun
/Data/Run/Config/Opal_1/mykey # likewise, if a user did configStore().put(mystring, psana.Source('Opal_1'),'mykey')
/Data/Run/EndData/noSrc/summary # if a user did configStore().put(myndarray, 'summary') during endrun
/Data/Run/EndData/Opal_1/summary # if a user did configStore().put(myndarray, 'summary') during endrun
# HERE IS WHERE REGULAR EVENT DATA IS
/Data/Run/Step:0000 /Configure:0000/Run:0000/CalibCycle:0000
/Data/Run/Step:0000/Config
/Data/Run/Step:0000/Config/noSrc
/Data/Run/Step:0000/Config/noSrc/myKeyString # if user adding something to configStore during begincalibcycle
/Data/Run/Step:0000/Epics
/Data/Run/Step:0000/Epics/pvName
/Data/Run/Step:0000/EBeam/BldDataEbeam
/Data/Run/Step:0000/Opal_1/CameraFrame
/Data/Run/Step:0000/Opal_1/TimeToolData
/Data/Run/Step:0000/MyTimeToolData {soft link to above}
/Data/Run/Step:0000/cs140_0
/Data/Run/Step:0000/cs140_0/CsPadElement
/Data/Run/Step:0000/evr0
/Data/Run/Step:0000/evr1
/Data/Run/Step:0000/evr0/EvrData
/Data/Run/Step:0000/evr1/EvrData
/Data/Run/Step:0000/NH2-SB1-IPM-01/IpimbConfig IpimbData
/Data/Run/Step:0000/IpmFexConfig
/Data/Run/Step:0000/IpimbConfig
/Data/Run/Step:0000/IpmFexConfig
NH2-SB1-IPM-01/IpmFex
/Data/Run/Step:0000/EndData
/Data/Run/Step:0000/EndData/noSrc/myKeyString
/Data/Run/Step:0000/EndData/opal_1/myKeyString
/Data/Run/EndData
/Data/CalibStore
same as before, but invert type/source, and use DAQ aliases |
...
Overview
Content Tools