Search/Navigation:
Related:
SLAC/EPP
/HPS Public
Jefferson Lab/Hall B
/HPS Run Wiki
S30XL-LESA/LDMX
...
$ ./bin/frontEndTestGui
Click <read status> and make sure no error is seen. If so, check that the FEB is powered correctly.
Make sure the AxiXAdc AxiXadc temperature is ok (50-60C).
Configure with config/FebConfigHw4.xml
Click <read status> and check that more registers are found.
Go to config and turn on power to hybrids using Register: HybridXPwrEn (X=0,1,2,3).
Click <Write config>.
Do a hard reset under commands/FebCore/HybridHardReset (current on AVDDP should drop ~100mA).
Click <Write config>.
Do a soft reset under commands/FebCore/HybridSoftReset.
Check that the hybrid currents measured are ok.
TBFAVDDP: 5.5V, AVDDN: 5.5V, DVDD: 5.5V and flange power 5.5V (parallel to DVDD).
N/A
...
TBF
TBF