Versions Compared

Old Version 4

changes.mady.by.user Unknown User (phansson)

Saved on

compared with

New Version 5

changes.mady.by.user Unknown User (phansson)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

How long would we need to run to get 100 88keV events?

...

Devboard lockup

...

Example:

New firmware, Gimp module, 10Hz baseline into file for ~2mins - OK
Directly after, 10Hz baseline into another file for in total 1200 events on counters. When I stop and then close the file I geta problem and I need to power cycle the devboard.

No Format

Got Status. Data Count=1157
System::runThread -> Name: Tracker, Run Stopped, RunTotal = 711
Device::set -> Name: Tracker Index: 0, Setting variable: DataFile, Value: /u1/software/daq/data1.bin
Device::set -> Name: Tracker Index: 0, Setting variable: RunRate, Value: 10Hz
Device::set -> Name: Tracker Index: 0, Setting variable: RunCount, Value: 10000000
Default Thresholds have been loaded!
Device::write -> name: Tracker, Index: 0x0 writing sub devices:
Device::write -> name: cntrlFpga, Index: 0x0 writing sub devices:
Device::write -> name: hybrid, Index: 0x0 writing sub devices:
Device::readStatus -> name: Tracker, Index: 0x0 reading sub devices:
CommLink::queueRegister -> Register: TrigCount, Read, Destination: 0x00000000, Address: 0x01000002, Attempt: 1, Timeout, Trying Again!
CommLink::queueRegister -> Register: TrigCount, Read, Destination: 0x00000000, Address: 0x01000002, Attempt: 2, Timeout, Trying Again!
CommLink::queueRegister -> Register: TrigCount, Read, Destination: 0x00000000, Address: 0x01000002, Attempt: 3, Timeout, Trying Again!
CommLink::queueRegister -> Register: TrigCount, Read, Destination: 0x00000000, Address: 0x01000002, Attempt: 4, Timeout, Trying Again!
CommLink::queueRegister -> Register: TrigCount, Read, Destination: 0x00000000, Address: 0x01000002, Attempt: 5, Timeout, Trying Again!
CommLink::queueRegister -> Register: TrigCount, Read, Destination: 0x00000000, Address: 0x01000002, Attempt: 6, Timeout, Trying Again!
CommLink::queueRegister -> Register: TrigCount, Read, Destination: 0x00000000, Address: 0x01000002, Failed!!!!
XmlClient::findErrors -> Found Error: CommLink::queueRegister -> Register: TrigCount, Read, Destination: 0x00000000, Address: 0x01000002, Failed!!!!

d