Page History
Optical measurement
Note |
---|
Chris informed me that in this measurement the detector was rotated by 180 degree, that requires to interchange of Q0 with Q2 and Q1 with Q3 parameters. It was done in 2013-01-24-CSPAD-XPP-Metrology-standard.txt file. |
...
Note from Chris: |
Procedure
- 2013-01-29-CSPAD-Metrology-XPP.xlsx- file from Chris Kenney
- 2013-01-29
...
...
...
...
- Use script
convertOpticalToStandard.py
to produce 2013-01-
...
...
Code Block |
---|
21 138001 72973 120 is changed for:
21 139001 72973 120
|
Then:
- Numeration of quads is still wrong by 180 degree... So, change the numeration in
- converted to the standard for quads file format,
- quads numeration is changed by 180 degree rotation (swapped data for Q0 with Q2 and Q1 with Q3) in:
2013-01-24-CSPAD-XPP-Metrology-standard.txt Image for all quads after correction:
QC procedure and results
- Apply the same corrections of a couple of corners:
Code Block Q1,p3: 12 21331 47024 47 -> x+200, y-200 12 21531 46824 47 Q3,p5: 24 90849 68979 218 -> x+300, y-200 24 91149 68779 218
QC procedure and results
We calculate
S1 - 1st short side length of 2x1
S2 - 2nd short side length of 2x1
L1 - 1st long side length of 2x1
L2 - 2nd long side length of 2x1
We calculate
S1 - 1st short side length of 2x1
S2 - 2nd short side length of 2x1
L1 - 1st long side length of 2x1
L2 - 2nd long side length of 2x1
D1 - 1st diagonal of 2x1 between corners 1 and 3
D2 - 2nd diagonal of 2x1 between corners 2 and 4
dS and dL are the deviations of the 1st and 2nd corner along the short and long sides, respectively. The sign of all dS are chosen in order to provide correct sign for the tilt angle (the same direction for all 2x1 sensors).
<dS/L> - the tilt angle of 2x1 averaged over two sides in radians.
angle(deg) - the same angle in degrees.
dD = D1 - D2
d(dS) = dS1 - dS2
d(dL) = dL1 - dL2
...
Code Block |
---|
pair: S1 S2 dS1 dS2 L1 L2 dL1 dL2 <dS/L> angle(deg) D1 D2 dD d(dS) d(dL) Quad 0 pair: 0 20891 20913 200 222 43539 43541 -102 -100 0.00485 0.27766 48298 48297 1 -22 -2 pair: 1 20910 20894 293 277 43540 43535 -127 -132 0.00655 0.37506 48302 48289 13 16 5 pair: 2 20890 20906 99 83 43536 43536 42 42 0.00209 0.11976 48290 48293 -3 16 0 pair: 3 20897 20895 131 133 43545 43543 65 63 0.00303 0.17369 48299 48297 2 -2 2 pair: 4 20911 20896 -30 -45 43549 43547 17 15 -0.00086 -0.04934 48303 48306 -3 15 2 pair: 5 20901 20898 10 7 43540 43544 -8 -4 0.00020 0.01119 48296 48299 -3 3 -4 pair: 6 20904 20903 104 105 43536 43540 55 59 0.00240 0.13752 48302 48290 12 -1 -4 pair: 7 20901 20901 -7 -7 43545 43543 -3 -5 -0.00016 -0.00921 48299 48301 -2 0 2 Quad 1 pair: 0 20913 20914 -343 -342 43540 43550 165 175 -0.00787 -0.45066 48313 48303 10 -1 -10 pair: 1 20898 20901 -145 -142 43548 43551 62 65 -0.00330 -0.18880 48300 48309 -9 -3 -3 pair: 2 20895 20903 -151 -159 43535 43532 -74 -77 -0.00356 -0.20400 48289 48291 -2 8 3 pair: 3 2067220872 20909 -35 -27272 43541 4335443554 163-37 -24 -0.0035400123 -0.2027607039 48294 4803648303 -9 258 23737 187-13 pair: 4 20940 20904 -455 -491 43527 43554 214 241 -0.01086 -0.62242 48309 48309 0 36 -27 pair: 5 20910 20903 -302 -309 43546 43546 145 145 -0.00702 -0.40196 48304 48307 -3 7 0 pair: 6 20901 20919 -421 -439 43529 43539 -213 -203 -0.00988 -0.56593 48296 48298 -2 18 -10 pair: 7 20907 20907 -452 -452 43548 43539 -201 -210 -0.01038 -0.59475 48315 48294 21 0 9 Quad 2 pair: 0 2091020914 20914 20906 -23725 -24125 43536 43531 43540 43546 10 103 11814 -0.0054900057 -0.3145203290 48300 48295 48300 48303 0 -8 0 4 -154 pair: 1 2093120901 20897 20900 -176 7 -207 3 43540 43539 43546 43536 90 -1 89 -0.0044011 -0.00011 0.2520000658 4830048293 4830548300 -57 31 4 110 pair: 2 2090320899 20903 -489256 -489260 4352643533 4353143539 -240127 -235121 -0.0112300593 -0.6436633954 4828748293 4829248294 -51 04 -56 pair: 3 2090020912 2090720904 -444210 -451202 4353843540 4353043547 -220106 -22899 -0.0102800473 -0.5889627106 4828648300 4830348306 -176 -8 7 8-7 pair: 4 2091120910 2090520903 -320543 -326550 4354143535 4353743536 156261 152262 -0.0074201255 -0.4250671923 4829948298 4830148299 -21 67 4-1 pair: 5 2091420904 2091220905 -15241 -17240 4354843538 4353743544 111 10 -1117 -0.0003700552 -0.0210531647 4830148298 4830748301 -63 -1 2 11-6 pair: 6 2089420903 20902 21 20896 22 -256 43539 -258 43543 43542 43544 8 -127 12 -125 -0.0059000049 -0.3381702829 4829548298 4830048298 -5 0 2-1 -24 pair: 7 2090920902 2090420903 -208 82 -203 81 43537 43541 43546 -10343547 -99 35 36 -0.0047200187 -0.2704310723 4829648300 4830048306 -46 -51 -41 Quad 3 pair: 0 20902 20898 -82 -86 43536 43543 30 37 -0.00193 -0.11054 48289 48302 -13 4 -7 pair: 1 20900 20904 79 83 43548 43541 -35 -42 0.00186 0.10658 48301 48301 0 -4 7 pair: 2 20912 20894 181 199 43536 43535 97 96 0.00436 0.25005 48298 48289 9 -18 1 pair: 3 20912 20905 119 126 43539 43538 57 56 0.00281 0.16121 48296 48301 -5 -7 1 pair: 4 20894 20912 -454 -436 43534 43545 212 223 -0.01022 -0.58560 48303 48296 7 -18 -11 pair: 5 20906 20719 -136 -323 43227 43535 155 463 -0.00528 -0.30268 48295 47937 358 187 -308 pair: 6 20902 20905 -203 -206 43537 43525 -89 -101 -0.00470 -0.26916 48293 48287 6 3 12 pair: 7 20900 20897 -140 -137 43539 43544 -68 -63 -0.00318 -0.18225 48298 48296 2 -3 -5 |
Comparing deviations of dS1 and dS2, and dL1 and dL2, we found:
- In Quad 1, pair: 3 mis-measured x and y - correction is applied as discussed below.
- In Quad 3, pair: 5 mis-measured x and y - correction is applied as discussed below.
- All other measurements are consistent within measurement precision about 10um
- Angles of 2x1 are in the range from -0.64 to +0.38 degree.
Quality check can be improved in 2013-01-24-CSPAD-XPP-Metrology-standard.txt if:
Code Block |
---|
Q1,p3:
12 21331 47024 47 -> x+200, y-200
12 21531 46824 47
Q3,p5:
24 90849 68979 218 -> x+300, y-200
24 91149 68779 218
|
This correction gives:
Code Block |
---|
pair: 56 0.00281 0.16121 48296 48301 -5 -7 1 pair: 4 20894 20912 -454 -436 43534 43545 212 223 -0.01022 -0.58560 48303 48296 S17 -18 S2 -11 pair: dS15 20906 dS2 20919 -336 L1 -323 L243527 43535 dL1 155 dL2 163 <dS/L> angle(deg)-0.00757 -0.43369 48295 D1 48294 D2 1 dD -13 d(dS) d(dL) Quad 1-8 pair: 3 6 20872 20902 20909 20905 -35203 -72206 4354143537 4355443525 -3789 -24101 -0.0012300470 -0.0703926916 48293 48294 48287 48303 -96 37 3 -13 Quad 312 pair: 57 2090620900 2091920897 -336140 -323137 4352743539 4353543544 155-68 163-63 -0.0075700318 -0.4336918225 48298 48295 48296 48294 2 1 -133 -8 |
...
5
|
- All measurements are consistent within measurement precision about 10um
- Angles of 2x1 are in the range from -0.59 to +0.25 degree.
Configuration parameters
center/0-end.data (pixel)
Code Block |
---|
196.58 197.46 312.31 99.99 629.11 629.05 710.60 497.27 199.85 198.38 314.45 101.18 630.72 632.74 711.36 499.00 199198.7936 198.4605 315313.1886 102101.6534 632630.9068 633632.4938 713710.9021 502498.0632 197.65 197.91 311.84 98.96 630.09 631.96 712.21 499.47 308.83 96.41 626.85 626.55 509.45 721.85 195.31 195.60 306.93 94.41 623.89 624.24 508.67 721.48 192.26 194.83 306.21 96 95.10 94624.3497 626.0784 629512.1686 511725.5173 724195.4049 196.2070 198.82 308.59 95.44 626.29 625.74 509.78 722.37 195.35 196.18 1.00 1.04 0.64 1.14 0.05 -0.03 -0.18 0.45 0.92 1.38 0.26 -0.01 0.62 0.13 1.35 1.25 1-2.8809 -1.8676 2-3.2400 1-2.9529 2-3.7484 2-4.8020 2-3.6963 -2.3694 1.83 1.58 2.23 2.32 1.92 2.07 1.42 0.54 |
...
Code Block |
---|
0.27766 0.37506 0.11976 0.17369 -0.04934 0.01119 0.13752 -0.00921 -0.45066 -0.18880 -0.20400 -0.07039 -0.62242 -0.40196 -0.56593 -0.59475 -0.3145203290 -0.2520000658 -0.6436633954 -0.5889627106 -0.4250671923 -0.0210531647 -0.3381702829 -0.2704310723 -0.11054 0.10658 0.25005 0.16121 -0.58560 -0.43369 -0.26916 -0.18225 |
...
Code Block |
---|
center x, y = 811.4911 839841.80 25 quad, x1, y1, dx, dy = 0 787785.0151 819824.0888 -2425.4861 -2016.7337 quad, x1, y1, dx, dy = 1 791.69 865.45 -19.8042 2524.6419 quad, x1, y1, dx, dy = 2 835.79 859.52 24.3067 1918.7126 quad, x1, y1, dx, dy = 3 831.48 815.17 1920.9836 -2426.6308 d1, d2 = 2018.0660 2425.7614 |
Test plot for CSPad using PyCSPadImage/src/Alignment.py
...