Page History
...
source
(default: "DetInfo()") – source of datakey
(default: "peaks") – key for input list of peaks, should be the same aspeaksKey
inImgPeakFinder
threshold_peak
(default: 0) – threshold on peak amplitudethreshold_total
(default: 0) – threshold on total peak intensity (in the matrix around peak)n_peaks_min
(default: 1) – minimal number of peaks above all thresholdsfilterIsOn
(default: true) – On/Off the filterprint_bits
(default: 0) – filter verbosity:- =0 - print nothing,
- +1 - input pars,
- +2 - summary,
- +4 - peaks' info,
- +8 - event ID.
Module ImgAlgos::Tahometer
Module configuration parameters:
dn
(default: 1) – number of events between printoutprint_bits
(default: 0) – filter verbosity:- =0 - print nothing,
- +1 - input pars,
- +2 - start and stop summary,
- +4 - instant rate performance.
Module ImgAlgos::TimeStampFilter
This module passes only the events if their time stamp is in the requested range.
The range of allowed time stamps is defined by the configuration parameters.
...
Overview
Content Tools