Page History
...
source
(default: "DetInfo(:Cspad)") – input source of datakey
(default: "") – key for input data, for example, it might be "calibrated"key_peaks_out
(default: "peaks") – key for vector of found peaks in the selected eventhot_pix_mask_inp_file
(default: "cspad-pix-mask-in.dat") – in read the pixel mask from filehot_pix_mask_out_file
(default: "cspad-pix-mask-out.dat") – out write current pixel mask in the filefrac_noisy_evts_file
(default: "cspad-pix-frac-out.dat") – out file with per-pixel fraction of noisy imagesevt_file_out
(default: "./cspad-ev-") – out file with signal CSPad array. Time stamp is added.rmin
(default: 3) – radial parameter of the area for median algorithmdr
(default: 1) – radial band width of the area for median algorithmSoNThr
(default: 3) – S/N threshold for each pixel to be considered as noisyfrac_noisy_imgs
(default: 0.1) – fraction of noisy images above which pixel will be maskedpeak_npix_min
(default: 4) – minimal number of connected pixels for the good peakpeak_npix_max
(default: 25) – maximal number of connected pixels for the good peakpeak_amp_tot_thr
(default: 100.) – threshold on total signal amplitude of the group of connected pixelsevent_npeak_min
(default: 10) – threshold on number of good peaks for the event selectionevent_amp_tot_thr
(default: 1000.) – threshold on total signal amplitude of all good peaks for the event selectionnevents_mask_update
(default: 100) – number of skipped events before each mask re-evaluation cyclenevents_mask_accum
(default: 50) – number of events for the mask re-evaluationselection_mode
(default: SELECTION_ON) – selection mode, other allowed values are: SELECTION_OFF, or SELECTION_INVout_file_bits
(default: 0) – control on writting of files:- =0 - do not write files,
- +1 - save the
hot_pix_mask_out_file
file with current mask array in theendJob(...)
method. - +2 - save the
frac_noisy_evts_file
file with current fraction of noisy events array in theendJob(...)
method. - +4 - save the CSPad signal array for selected events in the file with name like
<evt_file_out>-<counter>-<run>-<time stamp>.txt
. - +8 - save the vector of found peaks in file
<evt_file_out>-<counter>-<run>-<time-stamp>-peaks.txt
.
print_bits
(default: 0) – module verbosity:- =0 - print nothing,
- +1 - input pars (once in
beginJob
), - +2 - input initial and current mask statistics (in constructor and when mask is updated),
- +4- processed statistics for mask evaluation,event selection parameters (for each event); event no., time-stamp, mode, number of peaks, and amp_tot.
- +8 - output in files (for selected events),
- +16 - start/stop to collect data for mask re-evaluation (driven by the mode counters),
- +32 - event time stamp (for each event),
- +64 - vector of indexes and map of indexes for the median algorithm (once in
beginJob
), - +128- peak parameters before selection (for each event),
- +256- peak parameters saved in file (for selected events),
- +512- selection statistics (N<5: for each event; N<50: for each 10-th; N<500: for each 100-th, then for each 1000-th),+1024-event selection parameters (for each event); event no., time-stamp, mode, number of peaks, and amp_tot.
- Always print:
- Summary at the
endJob
.
- Summary at the
Overview
Content Tools