Page History

------- HPS SVT Start of Shift Checklist --------

Shifter name:

Time and date:

Previous Shifter:

Hall B beamline shifter:

Current run:

SVT module power status (ON/OFF):

Write down lowest and highest values of AVDD, DVDD and V125 currents, incl. module nr:

 [Low Voltage]      [Lowest (mA)]     [Highest (mA)] [FPGA] [Hybrid]
 AVDD
 DVDD
 V125



Check high voltage setting for each module:

Check SVT module temperature, write down highest and lowest temperature (FPGA 5 hybrid 1 should be 0):

                 [Hybrid/Module[FPGA & Hybrid #]
  Lowest [C]:
   Highest [C]:


Check temperature at the vacuum chamber input and output:

            [Temperature (C)]
Input:
Output:

ECal status (short summarye.g. Do all HV look ok? etc.):

Trigger statusType (short summarye.g. Single Cluster Trigger Top):

Pair spectrometer magnet:
         [Current]   [B-field]
Value:

Accelerator status:

Beam current (nA):

Beam position X,Y (um):

Beam plans for the shift (Closest measurement to Pair spectrometer):

SVT plans for the shift (Closest measurement to Pair spectrometer):

Notes from previous shifter:

 

------- HPS SVT Hourly Shift Checklist --------

Shifter name:

Current run/status:

Time:

SVT module power status (ON/OFF):

Write down lowest and highest values of AVDD, DVDD and V125 currents, incl. module nr:

[Low  Voltage]      [Lowest (mA)]     [Highest (mA)] [FPGA] [Hybrid]
 AVDD
 DVDD
 V125


Check high voltage setting for each module:

Check SVT module temperature, write down highest and lowest temperature (FPGA 5 hybrid 1 should be 0):

                 [Hybrid/Module[FPGA & Hybrid #]
  Lowest [C]:
   Highest [C]:


Check temperature at the vacuum chambler input and output:

            [Temperature (C)]
Input:
Output:


ECal status (write a small summarye.g. Do all HV look ok? etc.):

Trigger statusType (write a small summarye.g. Single Cluster Trigger Top):

Pair spectrometer magnet:
         [Current]   [B-field]
Value:

Accelerator status:

Beam current (nA) (Closest measurement to Pair spectrometer):

Beam position X,Y (um) (Closest measurement to Pair spectrometer):

Beam plans:

Notes/comments: