Page History

...

• The top button "IOC Status" gives you a status window for the IOCs, and allows you to reboot them. 
• "Alarm Handlers" brings up the alarm handlers (currently 4/28/12 not working), the next one handlers 
• "BEAM", gives a GUI window with two buttons, one for the main class display and one for the injector.
• "Voltages" button brings up a window with 2 new buttons which give you control of the SVT or ECAL voltages, see descriptions below.
• "Motors" currently (4/28/12) not working
• "Strip Charts" not yet working (4/28/12)
• "DAQ Status" not yet working (4/28/12)

...

The Ecal temperatures should be around 70F.

SVT Voltages brings up:

The Alarm Handler brings up: Image Added
When there is an alarm this button will be flashing, either yellow or red, and a beeping sound is made. Please read the Alarm section below how to navigate and respond to the alarms.

Turning power ON

Make sure that the box to the right of the OFF/ON buttons are RED.

...

To turn bias on individually please look at the section below.

Alarm Handler

To be filled.

What to look for:

Alarm panel

...

panel

...

Interlock signal

To be filled

...

...