Page History

...

• The top button "IOC Status" gives you a status window for the IOCs, and allows you to reboot them. 
• "Alarm Handlers" brings up the alarm handlers (currently 4/28/12 not working), the next one 
• "BEAM", gives a GUI window with two buttons, one for the main class display and one for the injector.
• "Voltages" button brings up a window with 2 new buttons which give you control of the SVT or ECAL voltages, see descriptions below.
• "Motors" currently (4/28/12) not working
• "Strip Charts" not yet working (4/28/12)
• "DAQ Status" not yet working (4/28/12)

"Temperatures" brings up:
    Image Modified
 
The SVT Temps and ECAL Temps bring up:

Image Modified

...

Note the "SVT DAQ Heartbeat":

...

 if this reads "dead", then the values on the GUI are old and

...

not updated. 

Check if the SVT DAQ is still running.

• If the SVT DAQ is down this is normal. Check how long it will be down and if you should power down the SVT.
• If SVT DAQ is ON and it has OK status: call the expert.
• If SVT DAQ is down and you didn't turn it off: call the expert
• Check that the temperature on the inlet and outlet of the vacuum box is normal

Pay attention as you need to determine the status of the system to avoid damaging temperature to the SVT. If unsure; call the expert.

Image Added

Two power supplies crates are being used to power the top and bottom volumes of the Silicon VertexTracker (SVT).

To connect to their interfaces, first login into clon10 from a JLab machine with the user name clasrun:

...

...

...