Page History
...
Run 5 DSD metrology,image, configuration
Run 5 XPP (solid plate) metrology for Mar 2012: spreadsheet, description
- Chris writes, "Here is the metrology for the camera on the new baseplate. All sensors locations are
relative to the lower, left corner of quadrant 3. Within each quadrant, I measured the sensor
corners starting form the lower left corner of each sensor and then moved clockwise around
the chip. - With the new mechanical package doing this by quadrants doesn't make sense. In the future, it
might be better to simply organize the metrology by vertical columns. - The 2x2 module numbering is also attached. It's the same as last time except two modules were
swapped."
Overview
Content Tools