...
- Fill Down. Set all the coefficients' values to the value of the first.
- Proportional. Set all the coefficients to their devices' value, and set the knob factor to 1 (ie, no change)
So good for moving all to 0 slowly. - Magic. What's that
Save and Load
TODO
Problems and Issues
- Knobs app can't set non-EPICS devices (eg correctors), so;
- In "drilldown" mode it offers you devices to set that it can't in fact set (eg having selected BX02 TO QM15, you select Y corrector YC21303 (which is in fact an SLC CS corrector), select FieldSet (which you shouldn't have been able to do) and then it can't connect.
WORK AROUND: Be conscious of what's SLC and what EPICS. See resources 0,1. - It makes bumps using correctors it can't set!
Eg: Select sequence indexes 2,3,4,5. Make Vertical design offset knobs. The first knob created is BPM21301. This contains 3 correctors, all SLC! Eg YXC21303 - YCOR:LI21:303. So, knob can't be implemented. This problem seems particularly acute for Vertical bumps! Are more of our horizontal correctors EPICS?
NO work around. *Will have to fix so that that elements which are not settable="true" in the xdxf file, are not included.
- In "drilldown" mode it offers you devices to set that it can't in fact set (eg having selected BX02 TO QM15, you select Y corrector YC21303 (which is in fact an SLC CS corrector), select FieldSet (which you shouldn't have been able to do) and then it can't connect.
- Knobs->"Proprotional Coefficients" spelt wrongly.
- Knobs Editor uses SNS type names, which themselves use >1 name eg hcorr == dch == horrzcorr => X correctors.
...