Cexp@ioc-in20-mg01>nvramConfigShow() NVRAM configuration: Boot file (e.g., '/TFTP/1.2.3.4/path', '~rshuser/path' or 'nfshost:/dir:path'): >mccfs2:/usr/local:/lcls/rtems/rtems-4.9.1/target/ssrlApps/powerpc-rtems/beatnik/bin/rtems.ralf Command line parameters: >INIT=/boot/lcls/epics/iocCommon/ioc-in20-mg01/startup.cmd Server IP: >172.27.8.11 Gateway IP: >172.27.8.1 My network IF + media (e.g., '100baseTX-full' ['?' for help]) >auto My IP: >172.27.11.14 My netmask: >255.255.252.0 My name: >ioc-in20-mg01 My domain: >slac.stanford.edu Loghost IP: > DNS server 1: >134.79.151.11 DNS server 2: >134.79.141.15 DNS server 3: > NTP server 1: >134.79.151.11 NTP server 2: >134.79.151.15 NTP server 3: > Use BOOTP: Yes, No or Partial (-> file and command line from NVRAM) [Y/N/P]>N Autoboot Delay: [0...30secs] (0==forever) >5 NOTE: Active and NVRAM boot configuration may differ due to user intervention (manual override of NVRAM) at boot time. To show the active configuration use: bootConfigShow() 0x00000000 (0) Cexp@ioc-in20-mg01> My IP: MY name: INIT=/boot/lcls/epics/iocCommon//startup.cmd You can leave the INIT field empty,and allow the ioc engineer to enter the correct path, see below INIT=