:
:
:
:
:
:
:
:
:
:
:
:
|
|
|
---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Total time to power on all towers: 73 seconds
Average tower power on time: 73 seconds
Total time to power on all free boards: 23 seconds
Average free board power on time: 23 seconds
:
:
readSiuCurrent: Read the SIU feed current as -0.01A
siuFeedVoltage: SIU 1 feed voltage 0.78V is within [-1.0, 1.0]
siuTemp: SIU 1 temperature 30.24C is within [-30.0, 45.0]
:
siuFeedVoltage: SIU 1 feed voltage 28.12V is within [27.0, 29.0]
siuCurrentDelta: SIU 1 feed current delta 0.31A is within [-1.0, 1.0]
siuVoltage: SIU 1 3.3/5V voltage 2.33V is within [0.0, 6.0]
siuMemCheck: SIU 1 Memory Check passed.
siuCommCheck: SIU 1 Comm Check passed.
siuBootTlm: SIU boot telemetry received.
siuTemp: SIU 1 temperature 30.16C is within [-30.0, 45.0]
:
siuVoltage: SIU 1 3.3/5V voltage 2.40V is within [0.0, 6.0]
siuMemCheck: SIU 1 Memory Check passed.
siuCommCheck: SIU 1 Comm Check passed.
siuBootTlm: SIU boot telemetry received.
siuTemp: SIU 1 temperature 30.24C is within [-30.0, 45.0]
siuTemp: Sending secondary boot command to SIU 1 using flags hi=0x5400, lo=0xc000 ...
:
latHskTlm: LAT housekeeping telemetry received.
siuTemp: SIU 1 temperature 30.24C is within [-30.0, 45.0]
:
:
siuCurrentDelta: Checking if dwell telemetry is in range [-1.000, 1.000] for payload VSC_RBPU_SIU_C, values [0.23, 0.27, 0.23, 0.25, 0.23] (starting with index:0, margin:0)
siuCurrentDelta: Dwell telemetry for payload VSC_RBPU_SIU_C are within [-1.000, 1.000]
siuVoltage: Checking if dwell telemetry is in range [0.000, 6.000] for payload L_DAQ_P_SIU_V, values [2.34, 2.36, 2.34, 2.34, 2.34] (starting with index:0, margin:0)
siuVoltage: Dwell telemetry for payload L_DAQ_P_SIU_V are within [0.000, 6.000]
siuTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload L_DAQ_P_SIU_T, values [29.67, 30.24, 29.59, 29.59, 29.26] (starting with index:0, margin:0)
siuTemp: Dwell telemetry for payload L_DAQ_P_SIU_T are within [-30.000, 45.000]
siuFeedVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload VSC_RBPU_SIU_V, values [28.08, 27.93, 28.32, 28.27, 28.22] (starting with index:0, margin:0)
siuFeedVoltage: Dwell telemetry for payload VSC_RBPU_SIU_V are within [27.000, 29.000]
siuCpuJTemp: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKSIUCPUJTEMP, values [35.00, 35.00, 35.00, 35.00, 35.00, 35.00, 35.00, 35.00, 35.00, 35.00, 35.00] (starting with index:0, margin:0)
siuCpuJTemp: Dwell telemetry for payload LHKSIUCPUJTEMP are within [1.000, 999.000]
siuCpuLdMin: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKSIUCPULDMIN, values [1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00] (starting with index:0, margin:0)
siuCpuLdMin: Dwell telemetry for payload LHKSIUCPULDMIN are within [1.000, 999.000]
siuCpuAvLdm: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKSIUCPUAVLDM, values [4.00, 4.00, 4.00, 4.00, 4.00, 4.00, 4.00, 3.00, 3.00, 3.00, 3.00] (starting with index:0, margin:0)
siuCpuAvLdm: Dwell telemetry for payload LHKSIUCPUAVLDM are within [1.000, 999.000]
siuCpuAvLds: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKSIUCPUAVLDS, values [1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00] (starting with index:0, margin:0)
siuCpuAvLds: Dwell telemetry for payload LHKSIUCPUAVLDS are within [1.000, 999.000]
siuCpuLdMax: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKSIUCPULDMAX, values [10.00, 10.00, 10.00, 10.00, 10.00, 10.00, 10.00, 10.00, 10.00, 10.00, 10.00] (starting with index:0, margin:0)
siuCpuLdMax: Dwell telemetry for payload LHKSIUCPULDMAX are within [1.000, 999.000]
readDaqFeedCurrent: Read the DAQ feed current as -0.10A
:
readDaqFeedCurrent: Read the DAQ feed current as 0.34A
daqFeedVoltage: DAQ feed voltage 0.20V is within [-1.0, 1.0]
pduTemp: PDU temperature 23.20C is within [-30.0, 45.0]
:
daqFeedVoltage: DAQ feed voltage 28.08V is within [27.0, 29.0]
daqCurrentDelta: DAQ feed current delta -0.39A is within [-2.0, 2.0]
pduTemp: PDU temperature 23.74C is within [-30.0, 45.0]
pduVoltage: PDU 1 3.3Vvoltage 0.01V is within [-0.10000000000000001, 0.10000000000000001]
readDaqFeedCurrent: Read the DAQ feed current as -0.05A
:
daqFeedVoltage: DAQ feed voltage 28.12V is within [27.0, 29.0]
pduTemp: PDU temperature 23.74C is within [-30.0, 45.0]
gasuTemp: GASU temperature 23.40C is within [-30.0, 45.0]
gasu33V: Checking if dwell telemetry is in range [3.000, 3.600] for payload L_DAQ_P_EBM33V, values [1.01, 3.30, 3.35, 3.36, 3.32] (starting with index:2, margin:0)
gasu33V: Dwell telemetry for payload L_DAQ_P_EBM33V are within [3.000, 3.600]
daqFeedVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload VSC_RBPU_DAQ_V, values [28.12, 28.08, 28.27, 28.27, 28.08] (starting with index:2, margin:0)
daqFeedVoltage: Dwell telemetry for payload VSC_RBPU_DAQ_V are within [27.000, 29.000]
gasuTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload L_DAQ_P_GASU_T, values [23.95, 23.13, 23.20, 23.74, 23.74] (starting with index:2, margin:0)
gasuTemp: Dwell telemetry for payload L_DAQ_P_GASU_T are within [-30.000, 45.000]
pduTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload L_DAQ_R_PDU_T, values [23.67, 24.01, 23.74, 23.81, 23.13] (starting with index:2, margin:0)
pduTemp: Dwell telemetry for payload L_DAQ_R_PDU_T are within [-30.000, 45.000]
pduVoltage: Checking if dwell telemetry is in range [3.000, 3.600] for payload L_DAQ_R_PDU_V, values [0.02, 3.40, 3.36, 3.35, 3.36] (starting with index:2, margin:0)
pduVoltage: Dwell telemetry for payload L_DAQ_R_PDU_V are within [3.000, 3.600]
gasu25V: Checking if dwell telemetry is in range [2.000, 2.600] for payload L_DAQ_P_EBM25V, values [-0.00, 2.47, 2.43, 2.47, 2.46] (starting with index:2, margin:0)
gasu25V: Dwell telemetry for payload L_DAQ_P_EBM25V are within [2.000, 2.600]
gasu25V: Checking if dwell telemetry is in range [2.000, 2.600] for payload L_DAQ_P_GEM25V, values [0.01, 2.46, 2.49, 2.43, 2.46] (starting with index:2, margin:0)
gasu25V: Dwell telemetry for payload L_DAQ_P_GEM25V are within [2.000, 2.600]
gasu33V: Checking if dwell telemetry is in range [3.000, 3.600] for payload L_DAQ_P_GEM33V, values [1.01, 3.35, 3.32, 3.32, 3.33] (starting with index:2, margin:0)
gasu33V: Dwell telemetry for payload L_DAQ_P_GEM33V are within [3.000, 3.600]
daqCurrentDelta: Checking if dwell telemetry is in range [-2.000, 2.000] for payload VSC_RBPU_DAQ_C, values [0.10, 0.44, 0.59, 0.10, 0.29] (starting with index:2, margin:0)
daqCurrentDelta: Dwell telemetry for payload VSC_RBPU_DAQ_C are within [-2.000, 2.000]
:
daqFeedVoltage: DAQ feed voltage 28.08V is within [27.0, 29.0]
daqCurrentDelta: DAQ feed current delta 0.78A is within [-2.0, 2.0]
pduTemp: PDU temperature 23.74C is within [-30.0, 45.0]
pduVoltage: PDU 1 3.3Vvoltage 3.39V is within [3.0, 3.6000000000000001]
gasuTemp: GASU temperature 24.01C is within [-30.0, 45.0]
gasuVoltages: AEM/EBM 3.3V voltage 3.27V is within [3.0, 3.6000000000000001]
gasuVoltages: AEM/EBM 2.5V voltage 2.43V is within [2.0, 2.6000000000000001]
gasuVoltages: CRU/GEM 3.3V voltage 3.32V is within [3.0, 3.6000000000000001]
gasuVoltages: CRU/GEM 2.5V voltage 2.44V is within [2.0, 2.6000000000000001]
readDaqFeedCurrent: Read the DAQ feed current as 0.34A
:
daqFeedVoltage: DAQ feed voltage 28.17V is within [27.0, 29.0]
epuTemp: PDU 1 EPU 0 temperature measured as 24.15C and within the required range of [-30.0, 45.0]
epuPwrMgt: Checking if dwell telemetry is in range [1.000, 1.000] for payload LHKP1EPU0PM, values [0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00] (starting with index:9, margin:5)
epuPwrMgt: Dwell telemetry for payload LHKP1EPU0PM are within [1.000, 1.000]
epuCnvt: Checking if dwell telemetry is in range [0.000, 0.000] for payload LHKP1EPU0CNVT, values [0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00] (starting with index:9, margin:5)
epuCnvt: Dwell telemetry for payload LHKP1EPU0CNVT are within [0.000, 0.000]
epuTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKP1EPU0T, values [24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15, 24.15] (starting with index:9, margin:5)
epuTemp: Dwell telemetry for payload LHKP1EPU0T are within [-30.000, 45.000]
:
daqFeedVoltage: DAQ feed voltage 28.08V is within [27.0, 29.0]
daqCurrentDelta: DAQ feed current delta 0.49A is within [-2.0, 2.0]
epuVoltage: PDU 1 EPU 0 3.3V voltage measured as 2.24V and within the required range of [2.0, 3.5]
epuBootTlm: EPU 0 boot telemetry received.
epuTemp: PDU 1 EPU 0 temperature measured as 24.44C and within the required range of [-30.0, 45.0]
readDaqFeedCurrent: Read the DAQ feed current as 1.17A
:
epuVoltage: PDU 1 EPU 0 3.3V voltage measured as 2.24V and within the required range of [2.0, 3.5]
epuTemp: PDU 1 EPU 0 temperature measured as 24.57C and within the required range of [-30.0, 45.0]
epuTemp: Sending secondary boot command to EPU 0 using flags hi=0x5400, lo=0xc000 ...
:
epuHskTlm: EPU 0 CPU junction temperature measured as 47 and within the required range of [1, 999]
epuTemp: PDU 1 EPU 0 temperature measured as 24.96C and within the required range of [-30.0, 45.0]
:
daqFeedVoltage: DAQ feed voltage 28.12V is within [27.0, 29.0]
epuTemp: PDU 1 EPU 1 temperature measured as 23.56C and within the required range of [-30.0, 45.0]
epuPwrMgt: Checking if dwell telemetry is in range [1.000, 1.000] for payload LHKP1EPU1PM, values [0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00] (starting with index:9, margin:5)
epuPwrMgt: Dwell telemetry for payload LHKP1EPU1PM are within [1.000, 1.000]
epuTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKP1EPU1T, values [23.59, 23.59, 23.59, 23.59, 23.59, 23.59, 23.56, 23.56, 23.56, 23.56, 23.56, 23.56, 23.56, 23.56, 23.56, 23.56, 23.56, 23.56, 23.56, 23.56] (starting with index:9, margin:5)
epuTemp: Dwell telemetry for payload LHKP1EPU1T are within [-30.000, 45.000]
epuCnvt: Checking if dwell telemetry is in range [0.000, 0.000] for payload LHKP1EPU1CNVT, values [0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00] (starting with index:9, margin:5)
epuCnvt: Dwell telemetry for payload LHKP1EPU1CNVT are within [0.000, 0.000]
:
daqFeedVoltage: DAQ feed voltage 28.12V is within [27.0, 29.0]
daqCurrentDelta: DAQ feed current delta 0.00A is within [-2.0, 2.0]
epuVoltage: PDU 1 EPU 1 3.3V voltage measured as 2.26V and within the required range of [2.0, 3.5]
epuBootTlm: EPU 1 boot telemetry received.
epuTemp: PDU 1 EPU 1 temperature measured as 23.88C and within the required range of [-30.0, 45.0]
readDaqFeedCurrent: Read the DAQ feed current as 1.71A
:
epuVoltage: PDU 1 EPU 1 3.3V voltage measured as 2.26V and within the required range of [2.0, 3.5]
epuTemp: PDU 1 EPU 1 temperature measured as 23.98C and within the required range of [-30.0, 45.0]
epuTemp: Sending secondary boot command to EPU 1 using flags hi=0x5400, lo=0xc000 ...
:
epuHskTlm: EPU 1 CPU junction temperature measured as 43 and within the required range of [1, 999]
epuTemp: PDU 1 EPU 1 temperature measured as 24.36C and within the required range of [-30.0, 45.0]
:
daqFeedVoltage: DAQ feed voltage 28.08V is within [27.0, 29.0]
temDaqTemp: PDU 1 TEM 0 DAQ board temperature measured as 23.64C and within the required range of [-30.0, 45.0]
temPsTemp: PDU 1 TEM 0 power supply temperature measured as 23.45C and within the required range of [-30.0, 45.0]
temVoltage: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKT0TEM33V, values [0.20, 0.20, 0.20, 0.20, 0.20, 0.20, 0.20, 0.20, 0.20, 3.41, 3.41, 3.41, 3.41, 3.41, 3.41, 3.41, 3.41, 3.41, 3.40, 3.40] (starting with index:9, margin:7)
temVoltage: Dwell telemetry for payload LHKT0TEM33V are within [3.000, 3.500]
temPsVoltage: Checking if dwell telemetry is in range [25.500, 29.000] for payload LHKT0TEM28V0, values [33.05, 33.05, 33.05, 33.05, 33.05, 33.05, 33.05, 33.05, 33.05, 28.06, 28.06, 28.06, 28.06, 28.06, 28.06, 28.06, 28.06, 28.06, 28.06, 28.06] (starting with index:9, margin:7)
temPsVoltage: Dwell telemetry for payload LHKT0TEM28V0 are within [25.500, 29.000]
temPsVoltage: Checking if dwell telemetry is in range [25.500, 29.000] for payload LHKT0TEM28V1, values [13.69, 13.69, 13.69, 13.69, 13.69, 13.69, 13.69, 13.69, 13.69, 28.14, 28.14, 28.14, 28.14, 28.14, 28.14, 28.14, 28.14, 28.14, 28.13, 28.13] (starting with index:9, margin:7)
temPsVoltage: Dwell telemetry for payload LHKT0TEM28V1 are within [25.500, 29.000]
:
daqFeedVoltage: DAQ feed voltage 28.27V is within [27.0, 29.0]
daqCurrentDelta: DAQ feed current delta -0.15A is within [-2.0, 2.0]
temPsCurrent: Warning: Conversion constant for LDET0TEM28I was not in the database, using the data from the configuration file
temPsCurrent: TEM 0 power supply current measured as -0.45A and within the required range of [-1.0, 5.0]
temVoltage: TEM 0 3.3V voltage measured as 3.40V and within the required range of [3.0, 3.5]
temDaqTemp: PDU 1 TEM 0 DAQ board temperature measured as 23.61C and within the required range of [-30.0, 45.0]
temPsTemp: PDU 1 TEM 0 power supply temperature measured as 23.45C and within the required range of [-30.0, 45.0]
readDaqFeedCurrent: Read the DAQ feed current as 1.56A
:
temPsTemp: PDU 1 TEM 0 power supply temperature measured as 23.42C and within the required range of [-30.0, 45.0]
calAfeeTemp: TEM 0 CAL AFEE 0 temperature 1 measured as 28.64C and within the required range of [-30.0, 45.0]
calAfeeTemp: TEM 0 CAL AFEE 1 temperature 1 measured as 28.20C and within the required range of [-30.0, 45.0]
calAfeeTemp: TEM 0 CAL AFEE 2 temperature 1 measured as 28.52C and within the required range of [-30.0, 45.0]
calAfeeTemp: TEM 0 CAL AFEE 3 temperature 1 measured as 27.55C and within the required range of [-30.0, 45.0]
calBiasVoltage: Checking if dwell telemetry is in range [0.000, 80.000] for payload LHKT0CALBSV0, values [0.12, 0.12, 0.12, 0.12, 0.12, 0.31, 0.31, 0.31, 0.31, 0.31, 0.31, 0.31, 0.31, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25] (starting with index:9, margin:5)
calBiasVoltage: Dwell telemetry for payload LHKT0CALBSV0 are within [0.000, 80.000]
calBiasVoltage: Checking if dwell telemetry is in range [0.000, 80.000] for payload LHKT0CALBSV1, values [0.12, 0.12, 0.12, 0.12, 0.12, 25.65, 25.65, 25.65, 25.65, 25.65, 25.65, 25.65, 25.65, 25.65, 25.65, 25.65, 25.65, 25.65, 25.65, 25.65] (starting with index:9, margin:5)
calBiasVoltage: Dwell telemetry for payload LHKT0CALBSV1 are within [0.000, 80.000]
cal33VA: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKT0CAL33VA, values [0.00, 0.00, 0.00, 0.00, 0.00, 3.39, 3.39, 3.39, 3.39, 3.39, 3.39, 3.39, 3.39, 3.39, 3.39, 3.39, 3.39, 3.39, 3.39, 3.39] (starting with index:9, margin:5)
cal33VA: Dwell telemetry for payload LHKT0CAL33VA are within [3.000, 3.500]
temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V1, values [28.13, 28.13, 28.13, 28.13, 28.13, 28.01, 28.01, 28.01, 28.01, 28.01, 28.01, 28.01, 28.01, 28.02, 28.02, 28.02, 28.02, 28.02, 28.02, 28.02] (starting with index:9, margin:5)
temPsVoltage: Dwell telemetry for payload LHKT0TEM28V1 are within [27.000, 29.000]
temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V0, values [28.06, 28.06, 28.06, 28.06, 28.06, 27.89, 27.89, 27.89, 27.89, 27.89, 27.89, 27.89, 27.89, 27.89, 27.89, 27.89, 27.89, 27.89, 27.89, 27.89] (starting with index:9, margin:5)
temPsVoltage: Dwell telemetry for payload LHKT0TEM28V0 are within [27.000, 29.000]
cal33VD: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKT0CAL33VD, values [0.00, 0.00, 0.00, 0.00, 0.00, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36] (starting with index:9, margin:5)
cal33VD: Dwell telemetry for payload LHKT0CAL33VD are within [3.000, 3.500]
:
daqFeedVoltage: DAQ feed voltage 27.78V is within [27.0, 29.0]
daqCurrentDelta: DAQ feed current delta 0.39A is within [-2.0, 2.0]
temPsCurrent: Warning: Conversion constant for LDET0TEM28I was not in the database, using the data from the configuration file
temPsCurrent: TEM 0 power supply current measured as -0.17A and within the required range of [-1.0, 5.0]
cal33V: TEM 0 CAL 3.3V digital measured as 3.36V and within the required range of [3.0, 3.5]
cal33V: TEM 0 CAL 3.3V analog measured as 3.39V and within the required range of [3.0, 3.5]
calBias: TEM 0 CAL bias V0 measured as 0.25V and within the required range of [0.0, 80.0]
calBias: TEM 0 CAL bias V1 measured as 25.65V and within the required range of [0.0, 80.0]
calBias: Warning: Conversion constant for LDET0CALBIASI was not in the database, using the data from the configuration file
calBias: TEM 0 CAL bias current measured as 0.01A and within the required range of [-1.0, 6.0]
calAfeeTemp: TEM 0 CAL AFEE 0 temperature 1 measured as 28.64C and within the required range of [-30.0, 45.0]
calAfeeTemp: TEM 0 CAL AFEE 1 temperature 1 measured as 28.16C and within the required range of [-30.0, 45.0]
calAfeeTemp: TEM 0 CAL AFEE 2 temperature 1 measured as 28.56C and within the required range of [-30.0, 45.0]
calAfeeTemp: TEM 0 CAL AFEE 3 temperature 1 measured as 27.59C and within the required range of [-30.0, 45.0]
readDaqFeedCurrent: Read the DAQ feed current as 1.90A
:
temPsTemp: PDU 1 TEM 0 power supply temperature measured as 23.42C and within the required range of [-30.0, 45.0]
tkrTemp: TEM 0 TKR cable 0 temperature 0 measured as 27.91C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 0 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 1 temperature 0 measured as 28.05C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 1 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 2 temperature 0 measured as 27.45C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 2 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 3 temperature 0 measured as 29.49C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 3 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 4 temperature 0 measured as 27.91C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 4 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 5 temperature 0 measured as 29.00C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 5 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 6 temperature 0 measured as 27.20C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 6 temperature 1 measured as -108.07C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 7 temperature 0 measured as 27.84C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 7 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
tkrBiasVoltage: Checking if dwell telemetry is in range [0.000, 105.000] for payload LHKT0TKRBV1, values [0.06, 0.06, 0.06, 0.06, 0.06, 25.90, 25.90, 25.90, 25.90, 25.90, 25.90, 25.90, 25.90, 25.77, 25.77, 25.77, 25.77, 25.77, 25.77, 25.77] (starting with index:9, margin:5)
tkrBiasVoltage: Dwell telemetry for payload LHKT0TKRBV1 are within [0.000, 105.000]
tkrBiasVoltage: Checking if dwell telemetry is in range [0.000, 105.000] for payload LHKT0TKRBV0, values [0.06, 0.06, 0.06, 0.06, 0.06, 0.37, 0.37, 0.37, 0.37, 0.37, 0.37, 0.37, 0.37, 0.31, 0.31, 0.31, 0.31, 0.31, 0.31, 0.31] (starting with index:9, margin:5)
tkrBiasVoltage: Dwell telemetry for payload LHKT0TKRBV0 are within [0.000, 105.000]
temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V1, values [28.02, 28.02, 28.02, 28.02, 28.02, 27.80, 27.80, 27.80, 27.80, 27.80, 27.80, 27.80, 27.80, 27.78, 27.78, 27.78, 27.78, 27.78, 27.78, 27.78] (starting with index:9, margin:5)
temPsVoltage: Dwell telemetry for payload LHKT0TEM28V1 are within [27.000, 29.000]
temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V0, values [27.89, 27.89, 27.89, 27.89, 27.89, 27.57, 27.57, 27.57, 27.57, 27.57, 27.57, 27.57, 27.57, 27.55, 27.55, 27.55, 27.55, 27.55, 27.55, 27.55] (starting with index:9, margin:5)
temPsVoltage: Dwell telemetry for payload LHKT0TEM28V0 are within [27.000, 29.000]
tkr15VA: Checking if dwell telemetry is in range [0.000, 2.000] for payload LHKT0TKR15VAA, values [0.00, 0.00, 0.00, 0.00, 0.00, 1.44, 1.44, 1.44, 1.44, 1.44, 1.44, 1.44, 1.44, 1.44, 1.44, 1.44, 1.44, 1.44, 1.44, 1.44] (starting with index:9, margin:5)
tkr15VA: Dwell telemetry for payload LHKT0TKR15VAA are within [0.000, 2.000]
tkr25VA: Checking if dwell telemetry is in range [0.000, 3.000] for payload LHKT0TKR25VAB, values [0.00, 0.00, 0.00, 0.00, 0.00, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56] (starting with index:9, margin:5)
tkr25VA: Dwell telemetry for payload LHKT0TKR25VAB are within [0.000, 3.000]
tkr25VD: Checking if dwell telemetry is in range [0.000, 3.000] for payload LHKT0TKR25VD, values [0.00, 0.00, 0.00, 0.00, 0.00, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53] (starting with index:9, margin:5)
tkr25VD: Dwell telemetry for payload LHKT0TKR25VD are within [0.000, 3.000]
:
daqFeedVoltage: DAQ feed voltage 27.93V is within [27.0, 29.0]
daqCurrentDelta: DAQ feed current delta 0.24A is within [-2.0, 2.0]
temPsCurrent: Warning: Conversion constant for LDET0TEM28I was not in the database, using the data from the configuration file
temPsCurrent: TEM 0 power supply current measured as 0.32A and within the required range of [-1.0, 5.0]
tkrVoltage: TEM 0 TKR 1.5V analog measured as 1.43V and within the required range of [0.0, 2.0]
tkrVoltage: TEM 0 TKR 2.5V digital measured as 2.53V and within the required range of [0.0, 3.0]
tkrVoltage: TEM 0 TKR 2.5V analog measured as 2.56V and within the required range of [0.0, 3.0]
tkrBias: TEM 0 TKR bias V0 measured as 0.31V and within the required range of [0.0, 105.0]
tkrBias: TEM 0 TKR bias V1 measured as 25.77V and within the required range of [0.0, 105.0]
tkrBias: Warning: Conversion constant for LDET0TKRBIASI was not in the database, using the data from the configuration file
tkrBias: TEM 0 TKR bias current measured as -0.00A and within the required range of [-1.0, 10.0]
tkrTemp: TEM 0 TKR cable 0 temperature 0 measured as 27.91C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 0 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 1 temperature 0 measured as 28.02C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 1 temperature 1 measured as -108.07C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 2 temperature 0 measured as 27.45C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 2 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 3 temperature 0 measured as 29.49C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 3 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 4 temperature 0 measured as 27.91C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 4 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 5 temperature 0 measured as 28.97C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 5 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 6 temperature 0 measured as 27.20C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 6 temperature 1 measured as -108.07C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 7 temperature 0 measured as 27.95C and within the required range of [-123.0, 45.0]
tkrTemp: TEM 0 TKR cable 7 temperature 1 measured as -114.72C and within the required range of [-123.0, 45.0]
readDaqFeedCurrent: Read the DAQ feed current as 2.49A
:
gasuVoltages: AEM/EBM 3.3V voltage 3.32V is within [3.0, 3.6000000000000001]
gasuVoltages: AEM/EBM 2.5V voltage 2.42V is within [2.0, 2.6000000000000001]
gasuVoltages: Read the free board current as 0.00A
freeBoardTemp: Checking if dwell telemetry is in range [-15.000, 30.000] for payload LHKAEMFR0T, values [22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36] (starting with index:20, margin:0)
freeBoardTemp: Dwell telemetry for payload LHKAEMFR0T are within [-15.000, 30.000]
freeBoardVoltage: Checking if dwell telemetry is in range [2.900, 3.800] for payload LHKAEMFR0VD, values [0.73, 0.73, 0.73, 0.73, 0.73, 0.73, 0.73, 3.43, 3.43, 3.43, 3.43, 3.43, 3.43, 3.43, 3.43, 3.55, 3.55, 3.55, 3.55, 3.55] (starting with index:20, margin:0)
freeBoardVoltage: Dwell telemetry for payload LHKAEMFR0VD are within [2.900, 3.800]
:
gasuVoltages: AEM/EBM 3.3V voltage 3.35V is within [3.0, 3.6000000000000001]
gasuVoltages: AEM/EBM 2.5V voltage 2.42V is within [2.0, 2.6000000000000001]
freeBoardVoltage: AEM free board 0 voltage measured as 3.55V and within the required range of [2.8999999999999999, 3.7999999999999998]
freeBoardCurrentDelta: Free board current delta 0.00A is within [0.0, 0.90000000000000002]
freeBoardTemp: AEM free board 0 temperature measured as 22.36C and within the required range of [-15.0, 30.0]
:
:
badAPID: Bad APID test passed. The result was ('CTS_APIDNOQ', '"APID %d (0x%04x) does not map to an ITC queue"')
invalidPayload: Invalid payload test passed. The result was ('LHK_PRMERR', '"Invalid command parameter: %s %x"')
incompleteCmd: Incomplete command test passed. CVT timeout occurred and EPKTPARM message was observed.