Total time to power on all towers: 866 seconds

Average tower power on time: 866 seconds

Total time to power on all free boards: 454 seconds

Average free board power on time: 454 seconds

readSiuCurrent: Read the SIU feed current as -0.02A

siuFeedVoltage: SIU 0 feed voltage 0.78V is within [-1.0, 1.0]

siuTemp: SIU 0 temperature 26.80C is within [23.0, 50.0]

siuFeedVoltage: SIU 0 feed voltage 27.93V is within [27.0, 29.0]

siuCurrentDelta: SIU 0 feed current delta 0.69A is within [-1.0, 1.0]

siuVoltage: SIU 0 3.3/5V voltage 2.34V is within [0.0, 6.0]

siuMemCheck: SIU 0 Memory Check passed.

siuCommCheck: SIU 0 Comm Check passed.

siuBootTlm: SIU boot telemetry received.

siuTemp: SIU 0 temperature 26.80C is within [23.0, 50.0]

siuVoltage: SIU 0 3.3/5V voltage 2.32V is within [0.0, 6.0]

siuMemCheck: SIU 0 Memory Check passed.

siuCommCheck: SIU 0 Comm Check passed.

siuBootTlm: SIU boot telemetry received.

siuTemp: SIU 0 temperature 27.62C is within [23.0, 50.0]

siuTemp: Sending secondary boot command to SIU 0 using flags hi=0x5400, lo=0xc000 ...

latHskTlm: LAT housekeeping telemetry received.

siuTemp: SIU 0 temperature 27.78C is within [23.0, 50.0]

siuCurrentDelta: Checking if dwell telemetry is in range [-1.000, 1.000] for payload VSC_RBPU_SIU_C, values [0.02, -0.01, 0.03, -0.01, -0.00] (starting with index:0, margin:0)

siuCurrentDelta: Dwell telemetry for payload VSC_RBPU_SIU_C are within [-1.000, 1.000]

siuVoltage: Checking if dwell telemetry is in range [0.000, 6.000] for payload L_DAQ_P_SIU_V, values [2.40, 2.34, 2.34, 2.34, 2.34] (starting with index:0, margin:0)

siuVoltage: Dwell telemetry for payload L_DAQ_P_SIU_V are within [0.000, 6.000]

siuTemp: Checking if dwell telemetry is in range [23.000, 50.000] for payload L_DAQ_P_SIU_T, values [28.01, 28.01, 28.63, 29.26, 28.08] (starting with index:0, margin:0)

siuTemp: Dwell telemetry for payload L_DAQ_P_SIU_T are within [23.000, 50.000]

siuFeedVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload VSC_RBPU_SIU_V, values [28.12, 28.03, 28.27, 28.03, 28.22] (starting with index:0, margin:0)

siuFeedVoltage: Dwell telemetry for payload VSC_RBPU_SIU_V are within [27.000, 29.000]

siuCpuJTemp: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKSIUCPUJTEMP, values [31.00, 31.00, 31.00, 31.00, 31.00, 31.00, 31.00, 31.00, 31.00, 31.00, 31.00] (starting with index:0, margin:0)

siuCpuJTemp: Dwell telemetry for payload LHKSIUCPUJTEMP are within [1.000, 999.000]

siuCpuLdMin: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKSIUCPULDMIN, values [1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00] (starting with index:0, margin:0)

siuCpuLdMin: Dwell telemetry for payload LHKSIUCPULDMIN are within [1.000, 999.000]

siuCpuAvLdm: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKSIUCPUAVLDM, values [1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00] (starting with index:0, margin:0)

siuCpuAvLdm: Dwell telemetry for payload LHKSIUCPUAVLDM are within [1.000, 999.000]

siuCpuAvLds: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKSIUCPUAVLDS, values [1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00] (starting with index:0, margin:0)

siuCpuAvLds: Dwell telemetry for payload LHKSIUCPUAVLDS are within [1.000, 999.000]

siuCpuLdMax: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKSIUCPULDMAX, values [1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00] (starting with index:0, margin:0)

siuCpuLdMax: Dwell telemetry for payload LHKSIUCPULDMAX are within [1.000, 999.000]

readDaqFeedCurrent: Read the DAQ feed current as -0.20A

daqFeedVoltage: DAQ feed voltage -0.05V is within [-1.0, 1.0]

pduTemp: PDU temperature 24.78C is within [23.0, 50.0]

daqFeedVoltage: DAQ feed voltage 28.47V is within [27.0, 29.0]

daqCurrentDelta: DAQ feed current delta 0.34A is within [-1.0, 1.0]

pduTemp: PDU temperature 24.22C is within [23.0, 50.0]

pduVoltage: Warning: Overriding limits [0.000, 6.000] with new limits [-1.000, 6.000]

pduVoltage: PDU 0 3.3Vvoltage -0.03V is within [-1.0, 6.0]

daqFeedVoltage: DAQ feed voltage 28.12V is within [27.0, 29.0]

pduTemp: PDU temperature 25.06C is within [23.0, 50.0]

gasuTemp: GASU temperature 24.85C is within [23.0, 30.0]

gasu33V: Checking if dwell telemetry is in range [3.000, 3.600] for payload L_DAQ_P_EBM33V, values [1.05, 3.34, 3.29, 3.35, 3.32] (starting with index:2, margin:0)

gasu33V: Dwell telemetry for payload L_DAQ_P_EBM33V are within [3.000, 3.600]

daqFeedVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload VSC_RBPU_DAQ_V, values [27.93, 28.08, 28.12, 28.08, 28.08] (starting with index:2, margin:0)

daqFeedVoltage: Dwell telemetry for payload VSC_RBPU_DAQ_V are within [27.000, 29.000]

gasuTemp: Checking if dwell telemetry is in range [23.000, 30.000] for payload L_DAQ_P_GASU_T, values [24.50, 24.15, 24.36, 25.34, 24.78] (starting with index:2, margin:0)

gasuTemp: Dwell telemetry for payload L_DAQ_P_GASU_T are within [23.000, 30.000]

pduVoltage: Checking if dwell telemetry is in range [0.000, 6.000] for payload L_DAQ_P_PDU_V, values [0.00, 3.35, 3.35, 3.34, 3.36] (starting with index:2, margin:0)

pduVoltage: Dwell telemetry for payload L_DAQ_P_PDU_V are within [0.000, 6.000]

pduTemp: Checking if dwell telemetry is in range [23.000, 50.000] for payload L_DAQ_P_PDU_T, values [24.29, 24.50, 24.78, 24.29, 24.22] (starting with index:2, margin:0)

pduTemp: Dwell telemetry for payload L_DAQ_P_PDU_T are within [23.000, 50.000]

gasu25V: Checking if dwell telemetry is in range [2.000, 2.600] for payload L_DAQ_P_EBM25V, values [-0.04, 2.46, 2.48, 2.43, 2.46] (starting with index:2, margin:0)

gasu25V: Dwell telemetry for payload L_DAQ_P_EBM25V are within [2.000, 2.600]

gasu25V: Checking if dwell telemetry is in range [2.000, 2.600] for payload L_DAQ_P_GEM25V, values [0.03, 2.48, 2.44, 2.48, 2.46] (starting with index:2, margin:0)

gasu25V: Dwell telemetry for payload L_DAQ_P_GEM25V are within [2.000, 2.600]

gasu33V: Checking if dwell telemetry is in range [3.000, 3.600] for payload L_DAQ_P_GEM33V, values [1.02, 3.34, 3.30, 3.32, 3.32] (starting with index:2, margin:0)

gasu33V: Dwell telemetry for payload L_DAQ_P_GEM33V are within [3.000, 3.600]

daqCurrentDelta: Checking if dwell telemetry is in range [-1.000, 1.500] for payload VSC_RBPU_DAQ_C, values [-0.20, 0.20, 0.20, 0.24, 0.20] (starting with index:2, margin:0)

daqCurrentDelta: Dwell telemetry for payload VSC_RBPU_DAQ_C are within [-1.000, 1.500]

daqFeedVoltage: DAQ feed voltage 27.93V is within [27.0, 29.0]

daqCurrentDelta: DAQ feed current delta 0.54A is within [-1.0, 1.5]

pduTemp: PDU temperature 24.50C is within [23.0, 50.0]

pduVoltage: PDU 0 3.3Vvoltage 3.35V is within [0.0, 6.0]

gasuTemp: GASU temperature 25.34C is within [23.0, 30.0]

gasuVoltages: AEM/EBM 3.3V voltage 3.28V is within [3.0, 3.6000000000000001]

gasuVoltages: AEM/EBM 2.5V voltage 2.42V is within [2.0, 2.6000000000000001]

gasuVoltages: CRU/GEM 3.3V voltage 3.34V is within [3.0, 3.6000000000000001]

gasuVoltages: CRU/GEM 2.5V voltage 2.46V is within [2.0, 2.6000000000000001]

daqFeedVoltage: DAQ feed voltage 28.03V is within [27.0, 29.0]

epuTemp: PDU 0 EPU 0 temperature measured as 22.32C and within the required range of [-30.0, 45.0]

epuPwrMgt: Checking if dwell telemetry is in range [1.000, 1.000] for payload LHKP0EPU0PM, values [0.00, 0.00, 0.00, 0.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00] (starting with index:9, margin:5)

epuPwrMgt: Dwell telemetry for payload LHKP0EPU0PM are within [1.000, 1.000]

epuTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKP0EPU0T, values [22.32, 22.32, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.36, 22.32, 22.32, 22.32, 22.32] (starting with index:9, margin:5)

epuTemp: Dwell telemetry for payload LHKP0EPU0T are within [-30.000, 45.000]

epuCnvt: Checking if dwell telemetry is in range [0.000, 0.000] for payload LHKP0EPU0CNVT, values [0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00] (starting with index:9, margin:5)

epuCnvt: Dwell telemetry for payload LHKP0EPU0CNVT are within [0.000, 0.000]

daqFeedVoltage: DAQ feed voltage 28.12V is within [27.0, 29.0]

daqCurrentDelta: DAQ feed current delta 0.10A is within [-1.0, 1.0]

epuVoltage: PDU 0 EPU 0 3.3V voltage measured as 2.25V and within the required range of [2.0, 3.5]

epuBootTlm: EPU boot telemetry received.

epuTemp: PDU 0 EPU 0 temperature measured as 22.36C and within the required range of [-30.0, 45.0]

epuVoltage: PDU 0 EPU 0 3.3V voltage measured as 2.25V and within the required range of [2.0, 3.5]

epuTemp: PDU 0 EPU 0 temperature measured as 22.57C and within the required range of [-30.0, 45.0]

epuTemp: Sending secondary boot command to EPU 0 using flags hi=0x5400, lo=0xc000 ...

epuHskTlm: EPU 0 CPU junction temperature measured as 44 and within the required range of [1, 999]

epuTemp: PDU 0 EPU 0 temperature measured as 22.82C and within the required range of [-30.0, 45.0]

daqFeedVoltage: DAQ feed voltage 28.12V is within [27.0, 29.0]

epuTemp: PDU 0 EPU 1 temperature measured as 22.44C and within the required range of [-30.0, 45.0]

epuPwrMgt: Checking if dwell telemetry is in range [1.000, 1.000] for payload LHKP0EPU1PM, values [0.00, 0.00, 0.00, 0.00, 0.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00, 1.00] (starting with index:9, margin:5)

epuPwrMgt: Dwell telemetry for payload LHKP0EPU1PM are within [1.000, 1.000]

epuCnvt: Checking if dwell telemetry is in range [0.000, 0.000] for payload LHKP0EPU1CNVT, values [0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00] (starting with index:9, margin:5)

epuCnvt: Dwell telemetry for payload LHKP0EPU1CNVT are within [0.000, 0.000]

epuTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKP0EPU1T, values [22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47, 22.47] (starting with index:9, margin:5)

epuTemp: Dwell telemetry for payload LHKP0EPU1T are within [-30.000, 45.000]

daqFeedVoltage: DAQ feed voltage 27.78V is within [27.0, 29.0]

daqCurrentDelta: DAQ feed current delta 0.59A is within [-1.0, 1.0]

epuVoltage: PDU 0 EPU 1 3.3V voltage measured as 2.26V and within the required range of [2.0, 3.5]

epuBootTlm: EPU boot telemetry received.

epuTemp: PDU 0 EPU 1 temperature measured as 22.47C and within the required range of [-30.0, 45.0]

epuVoltage: PDU 0 EPU 1 3.3V voltage measured as 2.27V and within the required range of [2.0, 3.5]

epuTemp: PDU 0 EPU 1 temperature measured as 22.69C and within the required range of [-30.0, 45.0]

epuTemp: Sending secondary boot command to EPU 1 using flags hi=0x5400, lo=0xc000 ...

epuHskTlm: Warning: EPU 1 CPU junction temperature measured as 0 which is not within the required range of [1.0, 999.0]

epuHskTlm: Warning: secondaryEpuBoot : Verification - Operator forced test epuHskTlm to pass

epuTemp: PDU 0 EPU 1 temperature measured as 27.12C and within the required range of [-30.0, 45.0]

daqFeedVoltage: DAQ feed voltage 28.08V is within [27.0, 29.0]

temDaqTemp: PDU 0 TEM 0 DAQ board temperature measured as 23.70C and within the required range of [-40.0, 60.0]

temPsTemp: PDU 0 TEM 0 power supply temperature measured as 22.98C and within the required range of [-40.0, 60.0]

temVoltage: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKT0TEM33V, values [0.19, 0.19, 0.19, 0.19, 0.19, 0.19, 0.19, 0.19, 0.19, 3.41, 3.41, 3.41, 3.41, 3.41, 3.41, 3.41, 3.40, 3.40, 3.40, 3.40] (starting with index:8, margin:7)

temVoltage: Dwell telemetry for payload LHKT0TEM33V are within [3.000, 3.500]

temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V0, values [33.05, 33.05, 33.05, 33.05, 33.05, 33.05, 33.05, 33.05, 33.05, 28.04, 28.04, 28.04, 28.04, 28.04, 28.04, 28.04, 28.04, 28.04, 28.04, 28.04] (starting with index:8, margin:7)

temPsVoltage: Dwell telemetry for payload LHKT0TEM28V0 are within [27.000, 29.000]

temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V1, values [11.49, 11.49, 11.49, 11.49, 11.49, 11.49, 11.49, 11.49, 11.49, 28.12, 28.12, 28.12, 28.12, 28.12, 28.12, 28.12, 28.11, 28.11, 28.11, 28.11] (starting with index:8, margin:7)

temPsVoltage: Dwell telemetry for payload LHKT0TEM28V1 are within [27.000, 29.000]

daqFeedVoltage: DAQ feed voltage 28.17V is within [27.0, 29.0]

daqCurrentDelta: DAQ feed current delta 0.20A is within [-1.0, 1.0]

temPsCurrent: Warning: Conversion constant for LDET0TEM28I was not in the database, using the data from the configuration file

temPsCurrent: TEM 0 power supply current measured as -0.41A and within the required range of [-1.0, 5.0]

temVoltage: TEM 0 3.3V voltage measured as 3.40V and within the required range of [3.0, 3.5]

temDaqTemp: PDU 0 TEM 0 DAQ board temperature measured as 23.73C and within the required range of [-40.0, 60.0]

temPsTemp: PDU 0 TEM 0 power supply temperature measured as 23.01C and within the required range of [-40.0, 60.0]

temPsTemp: PDU 0 TEM 0 power supply temperature measured as 23.35C and within the required range of [-30.0, 45.0]

calAfeeTemp: TEM 0 CAL AFEE 0 temperature 1 measured as 28.97C and within the required range of [23.0, 40.0]

calAfeeTemp: TEM 0 CAL AFEE 1 temperature 1 measured as 28.64C and within the required range of [23.0, 40.0]

calAfeeTemp: TEM 0 CAL AFEE 2 temperature 1 measured as 28.67C and within the required range of [23.0, 40.0]

calAfeeTemp: TEM 0 CAL AFEE 3 temperature 1 measured as 27.84C and within the required range of [23.0, 40.0]

calBiasVoltage: Checking if dwell telemetry is in range [0.000, 80.000] for payload LHKT0CALBSV0, values [0.12, 0.12, 0.12, 0.12, 0.12, 0.12, 0.12, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25, 0.25] (starting with index:9, margin:5)

calBiasVoltage: Dwell telemetry for payload LHKT0CALBSV0 are within [0.000, 80.000]

calBiasVoltage: Checking if dwell telemetry is in range [0.000, 80.000] for payload LHKT0CALBSV1, values [0.12, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 25.71, 25.71, 25.71, 25.71, 25.71, 25.71, 25.71, 25.71, 25.71, 25.71, 25.71, 25.71, 25.71] (starting with index:9, margin:5)

calBiasVoltage: Dwell telemetry for payload LHKT0CALBSV1 are within [0.000, 80.000]

cal33VA: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKT0CAL33VA, values [0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 3.38, 3.38, 3.38, 3.38, 3.38, 3.38, 3.38, 3.38, 3.38, 3.38, 3.38, 3.38, 3.38] (starting with index:9, margin:5)

cal33VA: Dwell telemetry for payload LHKT0CAL33VA are within [3.000, 3.500]

temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V1, values [28.11, 28.10, 28.10, 28.10, 28.10, 28.10, 28.10, 28.01, 28.01, 28.01, 28.01, 28.01, 28.01, 28.01, 28.00, 28.00, 28.00, 28.00, 28.00, 28.00] (starting with index:9, margin:5)

temPsVoltage: Dwell telemetry for payload LHKT0TEM28V1 are within [27.000, 29.000]

temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V0, values [28.04, 28.02, 28.02, 28.02, 28.02, 28.02, 28.02, 27.88, 27.88, 27.88, 27.88, 27.88, 27.88, 27.88, 27.88, 27.88, 27.88, 27.88, 27.88, 27.88] (starting with index:9, margin:5)

temPsVoltage: Dwell telemetry for payload LHKT0TEM28V0 are within [27.000, 29.000]

cal33VD: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKT0CAL33VD, values [0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36, 3.36] (starting with index:9, margin:5)

cal33VD: Dwell telemetry for payload LHKT0CAL33VD are within [3.000, 3.500]

daqFeedVoltage: DAQ feed voltage 27.93V is within [27.0, 29.0]

daqCurrentDelta: DAQ feed current delta 0.39A is within [-1.0, 1.0]

temPsCurrent: Warning: Conversion constant for LDET0TEM28I was not in the database, using the data from the configuration file

temPsCurrent: TEM 0 power supply current measured as -0.17A and within the required range of [-1.0, 5.0]

cal33V: TEM 0 CAL 3.3V digital measured as 3.36V and within the required range of [3.0, 3.5]

cal33V: TEM 0 CAL 3.3V analog measured as 3.38V and within the required range of [3.0, 3.5]

calBias: TEM 0 CAL bias V0 measured as 0.18V and within the required range of [0.0, 80.0]

calBias: TEM 0 CAL bias V1 measured as 25.59V and within the required range of [0.0, 80.0]

calBias: TEM 0 CAL bias current measured as 0.01A and within the required range of [-1.0, 6.0]

calAfeeTemp: TEM 0 CAL AFEE 0 temperature 1 measured as 28.89C and within the required range of [23.0, 40.0]

calAfeeTemp: TEM 0 CAL AFEE 1 temperature 1 measured as 28.64C and within the required range of [23.0, 40.0]

calAfeeTemp: TEM 0 CAL AFEE 2 temperature 1 measured as 28.64C and within the required range of [23.0, 40.0]

calAfeeTemp: TEM 0 CAL AFEE 3 temperature 1 measured as 27.84C and within the required range of [23.0, 40.0]

temPsTemp: PDU 0 TEM 0 power supply temperature measured as 23.60C and within the required range of [-30.0, 45.0]

tkrTemp: TEM 0 TKR cable 0 temperature 0 measured as 28.20C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 0 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 1 temperature 0 measured as 28.27C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 1 temperature 1 measured as -108.07C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 2 temperature 0 measured as 27.84C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 2 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 3 temperature 0 measured as 29.98C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 3 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 4 temperature 0 measured as 28.31C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 4 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 5 temperature 0 measured as 29.34C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 5 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 6 temperature 0 measured as 27.73C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 6 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 7 temperature 0 measured as 28.27C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 7 temperature 1 measured as -108.07C and within the required range of [-123.0, 40.0]

tkrBiasVoltage: Checking if dwell telemetry is in range [0.000, 100.000] for payload LHKT0TKRBV1, values [0.06, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 25.71, 25.71, 25.71, 25.71, 25.71, 25.71, 25.71, 25.77, 25.77, 25.77, 25.77, 25.77] (starting with index:9, margin:5)

tkrBiasVoltage: Dwell telemetry for payload LHKT0TKRBV1 are within [0.000, 100.000]

tkrBiasVoltage: Checking if dwell telemetry is in range [0.000, 100.000] for payload LHKT0TKRBV0, values [0.06, 0.06, 0.06, 0.06, 0.06, 0.06, 0.06, 0.06, 0.31, 0.31, 0.31, 0.31, 0.31, 0.31, 0.31, 0.31, 0.31, 0.31, 0.31, 0.31] (starting with index:9, margin:5)

tkrBiasVoltage: Dwell telemetry for payload LHKT0TKRBV0 are within [0.000, 100.000]

temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V1, values [28.00, 27.99, 27.99, 27.99, 27.99, 27.99, 27.99, 27.99, 27.76, 27.76, 27.76, 27.76, 27.76, 27.76, 27.76, 27.77, 27.77, 27.77, 27.77, 27.77] (starting with index:9, margin:5)

temPsVoltage: Dwell telemetry for payload LHKT0TEM28V1 are within [27.000, 29.000]

temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V0, values [27.87, 27.86, 27.86, 27.86, 27.86, 27.86, 27.86, 27.86, 27.52, 27.52, 27.52, 27.52, 27.52, 27.52, 27.52, 27.54, 27.54, 27.54, 27.54, 27.54] (starting with index:9, margin:5)

temPsVoltage: Dwell telemetry for payload LHKT0TEM28V0 are within [27.000, 29.000]

tkr15VA: Checking if dwell telemetry is in range [0.000, 2.000] for payload LHKT0TKR15VAA, values [0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 1.43, 1.43, 1.43, 1.43, 1.43, 1.43, 1.43, 1.43, 1.43, 1.43, 1.43, 1.43] (starting with index:9, margin:5)

tkr15VA: Dwell telemetry for payload LHKT0TKR15VAA are within [0.000, 2.000]

tkr25VA: Checking if dwell telemetry is in range [0.000, 3.000] for payload LHKT0TKR25VAB, values [0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56, 2.56] (starting with index:9, margin:5)

tkr25VA: Dwell telemetry for payload LHKT0TKR25VAB are within [0.000, 3.000]

tkr25VD: Checking if dwell telemetry is in range [0.000, 3.000] for payload LHKT0TKR25VD, values [0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53, 2.53] (starting with index:9, margin:5)

tkr25VD: Dwell telemetry for payload LHKT0TKR25VD are within [0.000, 3.000]

daqFeedVoltage: DAQ feed voltage 27.93V is within [27.0, 29.0]

daqCurrentDelta: DAQ feed current delta 0.59A is within [-1.0, 1.0]

temPsCurrent: Warning: Conversion constant for LDET0TEM28I was not in the database, using the data from the configuration file

temPsCurrent: TEM 0 power supply current measured as 0.36A and within the required range of [-1.0, 5.0]

tkrVoltage: TEM 0 TKR 1.5V analog measured as 1.43V and within the required range of [0.0, 2.0]

tkrVoltage: TEM 0 TKR 2.5V digital measured as 2.53V and within the required range of [0.0, 3.0]

tkrVoltage: TEM 0 TKR 2.5V analog measured as 2.56V and within the required range of [0.0, 3.0]

tkrBias: TEM 0 TKR bias V0 measured as 0.31V and within the required range of [0.0, 100.0]

tkrBias: TEM 0 TKR bias V1 measured as 25.90V and within the required range of [0.0, 100.0]

tkrBias: Warning: Conversion constant for LDET0TKRBIASI was not in the database, using the data from the configuration file

tkrBias: TEM 0 TKR bias current measured as -0.00A and within the required range of [-1.0, 10.0]

tkrTemp: TEM 0 TKR cable 0 temperature 0 measured as 28.38C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 0 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 1 temperature 0 measured as 28.34C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 1 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 2 temperature 0 measured as 27.98C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 2 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 3 temperature 0 measured as 30.06C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 3 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 4 temperature 0 measured as 28.45C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 4 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 5 temperature 0 measured as 29.45C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 5 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 6 temperature 0 measured as 27.87C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 6 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 7 temperature 0 measured as 28.49C and within the required range of [-123.0, 40.0]

tkrTemp: TEM 0 TKR cable 7 temperature 1 measured as -114.72C and within the required range of [-123.0, 40.0]

gasuVoltages: AEM/EBM 3.3V voltage 3.32V is within [3.0, 3.6000000000000001]

gasuVoltages: AEM/EBM 2.5V voltage 2.46V is within [2.0, 2.6000000000000001]

pmtRailTemp: Warning: ACD PMT rail temperature 0 measured as None which is not within the required range of [-130.0, 30.0]

pmtRailTemp: ACD PMT rail temperature 1 measured as -124.77C and within the required range of [-130.0, 30.0]

pmtRailTemp: ACD PMT rail temperature 2 measured as -124.77C and within the required range of [-130.0, 30.0]

pmtRailTemp: ACD PMT rail temperature 3 measured as -124.77C and within the required range of [-130.0, 30.0]

pmtRailTemp: Warning: powerOnAcdFreeBoard : Prerequisite - Operator forced test pmtRailTemp to pass

freeBoardTemp: Checking if dwell telemetry is in range [-120.000, 30.000] for payload LHKAEMFR0T, values [-114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72, -114.72] (starting with index:20, margin:0)

freeBoardTemp: Dwell telemetry for payload LHKAEMFR0T are within [-120.000, 30.000]

freeBoardVoltage: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKAEMFR0VD, values [0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 0.00, 3.71, 3.71, 3.71, 3.71, 3.71, 3.71, 3.71, 3.71, 3.71, 3.71, 3.71, 3.71, 3.71] (starting with index:20, margin:0)

freeBoardVoltage: Dwell telemetry for payload LHKAEMFR0VD are within [3.000, 3.500]

gasuVoltages: AEM/EBM 3.3V voltage 3.37V is within [3.0, 3.6000000000000001]

gasuVoltages: AEM/EBM 2.5V voltage 2.44V is within [2.0, 2.6000000000000001]

freeBoardVoltage: Warning: Overriding limits [3.000, 3.500] with new limits [3.000, 3.800]

freeBoardVoltage: AEM free board 0 voltage measured as 3.71V and within the required range of [3.0, 3.7999999999999998]

freeBoardCurrent: AEM free board 3.3 current sum measured as 0.00A and within the required range of [-1.0, 10.0]

freeBoardTemp: AEM free board 0 temperature measured as -114.72C and within the required range of [-120.0, 30.0]

gasuVoltages: AEM/EBM 3.3V voltage 3.36V is within [3.0, 3.6000000000000001]

gasuVoltages: AEM/EBM 2.5V voltage 2.53V is within [2.0, 2.6000000000000001]

pmtRailTemp: ACD PMT rail temperature 0 measured as -124.77C and within the required range of [-130.0, 30.0]

pmtRailTemp: ACD PMT rail temperature 1 measured as -124.77C and within the required range of [-130.0, 30.0]

pmtRailTemp: ACD PMT rail temperature 2 measured as -124.77C and within the required range of [-130.0, 30.0]

pmtRailTemp: ACD PMT rail temperature 3 measured as -124.77C and within the required range of [-130.0, 30.0]

hvbsVoltage: Warning: Overriding limits [-1.000, 1.000] with new limits [-23.000, 1.000]

hvbsVoltage: AEM free board 0 HV1 voltage measured as -22.85V and within the required range of [-23.0, 1.0]

gasuVoltages: AEM/EBM 3.3V voltage 3.32V is within [3.0, 3.6000000000000001]

gasuVoltages: AEM/EBM 2.5V voltage 2.42V is within [2.0, 2.6000000000000001]

hvbsVoltage: AEM free board 0 HV1 voltage measured as -16.73V and within the required range of [-100, 950]

hvbsVoltage: AEM free board 0 HV1 voltage measured as -16.05V and within the required range of [-100, 950]

psCurrent: AEM free board 28V current sum measured as 0.00A and within the required range of [-1.0, 10.0]

pmtRailTemp: ACD PMT rail temperature 0 measured as -124.77C and within the required range of [-130.0, 30.0]

pmtRailTemp: ACD PMT rail temperature 1 measured as -124.77C and within the required range of [-130.0, 30.0]

pmtRailTemp: ACD PMT rail temperature 2 measured as -124.77C and within the required range of [-130.0, 30.0]

pmtRailTemp: ACD PMT rail temperature 3 measured as -124.77C and within the required range of [-130.0, 30.0]

badAPID: Bad APID test passed. The result was ('CTS_APIDNOQ', '"APID %d (0x%04x) does not map to an ITC queue"')

invalidPayload: Invalid payload test passed. The result was ('LHK_PRMERR', '"Invalid command parameter: %s %x"')

incompleteCmd: Incomplete command test passed. CVT timeout occurred and EPKTPARM message was observed.

ambientPower: LAT input power measured as 74.72W and within the required range of [0, 750]

averagePower: LAT average input power measured as 85.22W and within the required range of [0, 650]

peakPower: LAT peak input power measured as 89.42W and within the required range of [0, 750]