Hardware Configuration

SIU Cross Strapping: AA

DAQ Cross Strapping: AA

DAQ Feed: Primary

SIU: Primary

GASU: Primary

EPU-A: 0

EPU-B: 1

ACD HVBS: 1

PDU: Redundant

Test Summary

Configuration file: tbLatPowerOn.cfg

Configuration file version: 1.15

Configuration file release: L00-12-00

Run Id: 101000061

Run Report: 101000061_rcReport.xml

Start Up Step	Prerequisite	Verification
Power On ACD bias voltages for free boards [0]	PASSED	PASSED

Completion Status: PASSED

Prerequisite:

gasuVoltages: AEM/EBM 3.3V voltage 3.32V is within [3.0, 3.6000000000000001]

gasuVoltages: AEM/EBM 2.5V voltage 2.51V is within [2.0, 2.6000000000000001]

hvbsVoltage: AEM free board 0 HV1 voltage measured as 10.13V and within the required range of [-60.0, 60.0]

freeBoardCurrent: AEM free board 3.3 current sum measured as 0.00A and within the required range of [-1.0, 10.0]

Verification:

gasuVoltages: AEM/EBM 3.3V voltage 3.36V is within [3.0, 3.6000000000000001]

gasuVoltages: AEM/EBM 2.5V voltage 2.50V is within [2.0, 2.6000000000000001]

hvbsVoltage: AEM free board 0 HV1 voltage measured as 318.85V and within the required range of [270, 330]

hvbsVoltage: AEM free board 0 HV1 voltage measured as 773.09V and within the required range of [666, 814]

psCurrent: AEM free board 28V current sum measured as 0.00A and within the required range of [-1.0, 10.0]