LAT01x - LAT Power Off Sequence Test [101000056]

 

 

 

 

 

 

 

LatPowerOff
LAT01x - LAT Power Off Sequence Test

Tue Mar 28 19:16:15 2006

 

 

 

 

 

 

 

Hardware Configuration

:  AA

:  AA

:  Primary

:  Primary

:  Primary

:  0

:  1

:  1

:  Redundant

Test Summary

:  tbLatPowerOff.cfg

:  1.8

:  L00-12-00

:  101000056

:  101000056_rcReport.xml

Start Up Step Prerequisite Verification
Check if the LAT is Powered On PASSED PASSED
Reduce ACD HVBS for Free Board 0 to Minimum PASSED PASSED
Power Off ACD Free Board 0 PASSED PASSED
Power Off the AEM PASSED PASSED
Reduce TEM 0 TKR Bias Voltage to Minimum PASSED PASSED
Power Off TEM 0 TKR PASSED PASSED
Reduce TEM 0 CAL Bias Voltage to Minimum PASSED PASSED
Power Off TEM 0 CAL PASSED PASSED
Power Off TEM 0 PASSED PASSED
Power Off EPU 1 PASSED PASSED
Power Off EPU 0 PASSED PASSED
Power Off GASU and PDU PASSED PASSED
Ambient, Average and Peak Power Consumption PASSED PASSED

:  PASSED

Check if the LAT is Powered On

: 

: 

freeBoardCurrent: Checking if dwell telemetry is in range [-1.000, 10.000] for payload LHKAFR33ISUM, values [0.00, 0.00, 0.00, 0.00] (starting with index:0, margin:0)

freeBoardCurrent: Dwell telemetry for payload LHKAFR33ISUM are within [-1.000, 10.000]

calBiasVoltage: Checking if dwell telemetry is in range [0.000, 80.000] for payload LHKT0CALBSV0, values [73.99, 74.05, 74.05, 74.05] (starting with index:0, margin:0)

calBiasVoltage: Dwell telemetry for payload LHKT0CALBSV0 are within [0.000, 80.000]

calBiasVoltage: Checking if dwell telemetry is in range [0.000, 80.000] for payload LHKT0CALBSV1, values [78.74, 78.80, 78.68, 78.74] (starting with index:0, margin:0)

calBiasVoltage: Dwell telemetry for payload LHKT0CALBSV1 are within [0.000, 80.000]

freeBoardTemp: Checking if dwell telemetry is in range [-15.000, 30.000] for payload LHKAEMFR0T, values [24.15, 24.11, 24.15] (starting with index:0, margin:0)

freeBoardTemp: Dwell telemetry for payload LHKAEMFR0T are within [-15.000, 30.000]

calAfeeTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKT0CALAF1T1, values [28.74, 28.78, 28.78, 28.78] (starting with index:0, margin:0)

calAfeeTemp: Dwell telemetry for payload LHKT0CALAF1T1 are within [-30.000, 45.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC0T1, values [-114.72, -108.07, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC0T1 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC0T0, values [29.75, 29.72, 29.72, 29.75] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC0T0 are within [-123.000, 40.000]

siuVoltage: Checking if dwell telemetry is in range [0.000, 6.000] for payload L_DAQ_P_SIU_V, values [2.36, 2.33, 2.36, 2.34, 2.34, 2.38, 2.36, 2.32, 2.34, 2.34, 2.35, 2.35, 2.36, 2.35, 2.34, 2.35, 2.34, 2.32, 2.34, 2.34, 2.38, 2.38, 2.34, 2.33, 2.38, 2.38, 2.38, 2.34, 2.38, 2.40] (starting with index:0, margin:0)

siuVoltage: Dwell telemetry for payload L_DAQ_P_SIU_V are within [0.000, 6.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC6T0, values [29.19, 29.19, 29.19, 29.19] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC6T0 are within [-123.000, 40.000]

siuTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload L_DAQ_P_SIU_T, values [31.67, 30.91, 31.33, 30.99, 31.50, 30.99, 32.02, 31.59, 30.32, 30.32, 30.99, 30.91, 30.32, 30.57, 30.24, 30.32, 30.82, 30.32, 30.24, 30.40, 31.67, 30.99, 30.24, 31.59, 31.67, 30.82, 30.24, 31.67, 30.91, 32.28] (starting with index:0, margin:0)

siuTemp: Dwell telemetry for payload L_DAQ_P_SIU_T are within [-30.000, 45.000]

calAfeeTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKT0CALAF0T1, values [29.00, 29.04, 29.04, 29.00] (starting with index:0, margin:0)

calAfeeTemp: Dwell telemetry for payload LHKT0CALAF0T1 are within [-30.000, 45.000]

tkr25VD: Checking if dwell telemetry is in range [0.000, 3.000] for payload LHKT0TKR25VD, values [2.52, 2.52, 2.52, 2.52] (starting with index:0, margin:0)

tkr25VD: Dwell telemetry for payload LHKT0TKR25VD are within [0.000, 3.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC7T0, values [29.57, 29.60, 29.53, 29.53] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC7T0 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC7T1, values [-114.72, -114.72, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC7T1 are within [-123.000, 40.000]

epuVoltage: Checking if dwell telemetry is in range [2.000, 3.500] for payload LHKP1EPU133V, values [2.26, 2.26, 2.26] (starting with index:0, margin:0)

epuVoltage: Dwell telemetry for payload LHKP1EPU133V are within [2.000, 3.500]

calAfeeTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKT0CALAF2T1, values [28.97, 28.97, 29.00, 29.00] (starting with index:0, margin:0)

calAfeeTemp: Dwell telemetry for payload LHKT0CALAF2T1 are within [-30.000, 45.000]

calAfeeTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKT0CALAF3T1, values [27.95, 27.98, 28.02, 27.91] (starting with index:0, margin:0)

calAfeeTemp: Dwell telemetry for payload LHKT0CALAF3T1 are within [-30.000, 45.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC4T1, values [-114.72, -114.72, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC4T1 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC4T0, values [30.02, 30.02, 30.06, 29.98] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC4T0 are within [-123.000, 40.000]

epuHskTlm: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKEPU1CPUJTEMP, values [47.00, 47.00, 47.00] (starting with index:0, margin:0)

epuHskTlm: Dwell telemetry for payload LHKEPU1CPUJTEMP are within [1.000, 999.000]

hvbsOpsVoltage[0]: Checking if dwell telemetry is in range [666.000, 814.000] for payload LHKAEMFR0V1, values [10.13, 9.79, 10.13] (starting with index:0, margin:0)

hvbsOpsVoltage[0]: Warning: Dwell telemetry failed. Payload LHKAEMFR0V1 value 10.130 is not within [666.000, 814.000]

daqFeedVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload VSC_RBPU_DAQ_V, values [27.88, 28.08, 28.08, 27.93, 28.03, 27.78, 27.98, 28.22, 27.93, 27.93, 27.73, 27.93, 27.93, 27.73, 28.08, 28.03, 28.22, 28.12, 27.93, 28.08, 28.17, 27.78, 27.93, 27.64, 27.93, 27.93, 27.93, 27.88, 28.17, 27.73] (starting with index:0, margin:0)

daqFeedVoltage: Dwell telemetry for payload VSC_RBPU_DAQ_V are within [27.000, 29.000]

epuVoltage: Checking if dwell telemetry is in range [2.000, 3.500] for payload LHKP1EPU033V, values [2.24, 2.24, 2.24] (starting with index:0, margin:0)

epuVoltage: Dwell telemetry for payload LHKP1EPU033V are within [2.000, 3.500]

epuTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKP1EPU0T, values [29.12, 29.16, 29.16] (starting with index:0, margin:0)

epuTemp: Dwell telemetry for payload LHKP1EPU0T are within [-30.000, 45.000]

gasuTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload L_DAQ_P_GASU_T, values [25.63, 25.92, 25.63, 25.48, 25.99, 25.48, 25.99, 25.92, 25.70, 25.48, 25.99, 25.99, 25.48, 25.99, 25.48, 25.48, 25.92, 25.99, 26.28, 25.48, 25.92, 25.48, 25.99, 25.56, 25.99, 25.99, 25.06, 25.41, 25.34, 25.41] (starting with index:0, margin:0)

gasuTemp: Dwell telemetry for payload L_DAQ_P_GASU_T are within [-30.000, 45.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC3T0, values [31.75, 31.79, 31.75, 31.75] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC3T0 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC6T1, values [-114.72, -108.07, -108.07, -108.07] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC6T1 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC2T1, values [-114.72, -114.72, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC2T1 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC2T0, values [29.79, 29.79, 29.79, 29.79] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC2T0 are within [-123.000, 40.000]

gasu33V: Checking if dwell telemetry is in range [3.000, 3.600] for payload L_DAQ_P_EBM33V, values [3.32, 3.30, 3.35, 3.33, 3.33, 3.35, 3.32, 3.40, 3.35, 3.35, 3.34, 3.33, 3.35, 3.32, 3.29, 3.28, 3.35, 3.32, 3.35, 3.30, 3.32, 3.27, 3.35, 3.32, 3.35, 3.37, 3.32, 3.32, 3.34, 3.34] (starting with index:0, margin:0)

gasu33V: Dwell telemetry for payload L_DAQ_P_EBM33V are within [3.000, 3.600]

cal33VA: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKT0CAL33VA, values [3.38, 3.38, 3.38, 3.38] (starting with index:0, margin:0)

cal33VA: Dwell telemetry for payload LHKT0CAL33VA are within [3.000, 3.500]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC3T1, values [-114.72, -114.72, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC3T1 are within [-123.000, 40.000]

cal33VD: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKT0CAL33VD, values [3.36, 3.36, 3.36, 3.36] (starting with index:0, margin:0)

cal33VD: Dwell telemetry for payload LHKT0CAL33VD are within [3.000, 3.500]

freeBoardVoltage: Checking if dwell telemetry is in range [2.900, 3.800] for payload LHKAEMFR0VD, values [3.55, 3.54, 3.55] (starting with index:0, margin:0)

freeBoardVoltage: Dwell telemetry for payload LHKAEMFR0VD are within [2.900, 3.800]

tkr15VA: Checking if dwell telemetry is in range [0.000, 2.000] for payload LHKT0TKR15VAA, values [1.43, 1.43, 1.43, 1.43] (starting with index:0, margin:0)

tkr15VA: Dwell telemetry for payload LHKT0TKR15VAA are within [0.000, 2.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC1T0, values [29.68, 29.64, 29.68, 29.64] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC1T0 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC1T1, values [-108.07, -108.07, -108.07, -108.07] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC1T1 are within [-123.000, 40.000]

gasu25V: Checking if dwell telemetry is in range [2.000, 2.600] for payload L_DAQ_P_EBM25V, values [2.53, 2.42, 2.42, 2.42, 2.46, 2.46, 2.48, 2.48, 2.44, 2.43, 2.47, 2.50, 2.43, 2.46, 2.46, 2.43, 2.51, 2.46, 2.46, 2.47, 2.46, 2.45, 2.46, 2.51, 2.46, 2.46, 2.46, 2.46, 2.47, 2.50] (starting with index:0, margin:0)

gasu25V: Dwell telemetry for payload L_DAQ_P_EBM25V are within [2.000, 2.600]

gasu25V: Checking if dwell telemetry is in range [2.000, 2.600] for payload L_DAQ_P_GEM25V, values [2.46, 2.46, 2.50, 2.46, 2.44, 2.46, 2.46, 2.44, 2.52, 2.48, 2.48, 2.47, 2.50, 2.46, 2.43, 2.47, 2.48, 2.43, 2.50, 2.45, 2.46, 2.46, 2.45, 2.46, 2.50, 2.44, 2.46, 2.46, 2.47, 2.46] (starting with index:0, margin:0)

gasu25V: Dwell telemetry for payload L_DAQ_P_GEM25V are within [2.000, 2.600]

gasu33V: Checking if dwell telemetry is in range [3.000, 3.600] for payload L_DAQ_P_GEM33V, values [3.31, 3.30, 3.30, 3.30, 3.35, 3.29, 3.35, 3.28, 3.31, 3.29, 3.32, 3.32, 3.32, 3.35, 3.30, 3.32, 3.32, 3.32, 3.36, 3.30, 3.32, 3.28, 3.33, 3.27, 3.33, 3.32, 3.34, 3.27, 3.33, 3.32] (starting with index:0, margin:0)

gasu33V: Dwell telemetry for payload L_DAQ_P_GEM33V are within [3.000, 3.600]

temPsTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKP1TEM0PST, values [24.61, 24.61, 24.61] (starting with index:0, margin:0)

temPsTemp: Dwell telemetry for payload LHKP1TEM0PST are within [-30.000, 45.000]

temVoltage: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKT0TEM33V, values [3.40, 3.40, 3.40, 3.40] (starting with index:0, margin:0)

temVoltage: Dwell telemetry for payload LHKT0TEM33V are within [3.000, 3.500]

daqFeedCurrent: Checking if dwell telemetry is in range [-1.000, 20.000] for payload VSC_RBPU_DAQ_C, values [2.73, 2.20, 2.39, 2.49, 2.15, 2.34, 2.34, 2.34, 2.69, 2.64, 2.29, 2.15, 2.29, 2.59, 2.39, 2.29, 2.39, 2.29, 2.59, 2.34, 2.34, 2.59, 2.29, 2.49, 2.49, 2.69, 2.34, 2.49, 2.34, 2.34] (starting with index:0, margin:0)

daqFeedCurrent: Dwell telemetry for payload VSC_RBPU_DAQ_C are within [-1.000, 20.000]

tkrBiasVoltage: Checking if dwell telemetry is in range [0.000, 105.000] for payload LHKT0TKRBV1, values [25.84, 25.90, 25.77, 25.84] (starting with index:0, margin:0)

tkrBiasVoltage: Dwell telemetry for payload LHKT0TKRBV1 are within [0.000, 105.000]

tkrBiasVoltage: Checking if dwell telemetry is in range [0.000, 105.000] for payload LHKT0TKRBV0, values [0.25, 0.31, 0.31, 0.31] (starting with index:0, margin:0)

tkrBiasVoltage: Dwell telemetry for payload LHKT0TKRBV0 are within [0.000, 105.000]

epuPwrMgt: Checking if dwell telemetry is in range [1.000, 1.000] for payload LHKP1EPU0PM, values [1.00, 1.00, 1.00] (starting with index:0, margin:0)

epuPwrMgt: Dwell telemetry for payload LHKP1EPU0PM are within [1.000, 1.000]

temDaqTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKP1TEM0PCT, values [26.24, 26.27, 26.27] (starting with index:0, margin:0)

temDaqTemp: Dwell telemetry for payload LHKP1TEM0PCT are within [-30.000, 45.000]

temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V1, values [27.78, 27.79, 27.77, 27.78] (starting with index:0, margin:0)

temPsVoltage: Dwell telemetry for payload LHKT0TEM28V1 are within [27.000, 29.000]

temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V0, values [27.56, 27.56, 27.54, 27.55] (starting with index:0, margin:0)

temPsVoltage: Dwell telemetry for payload LHKT0TEM28V0 are within [27.000, 29.000]

pduTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload L_DAQ_R_PDU_T, values [25.41, 24.85, 24.78, 24.78, 24.36, 24.36, 24.29, 24.01, 24.78, 24.22, 24.29, 24.85, 24.22, 24.50, 24.22, 24.22, 24.78, 24.22, 24.50, 24.22, 24.50, 23.95, 23.74, 24.29, 24.29, 24.22, 24.29, 24.78, 24.50, 24.85] (starting with index:0, margin:0)

pduTemp: Dwell telemetry for payload L_DAQ_R_PDU_T are within [-30.000, 45.000]

epuPwrMgt: Checking if dwell telemetry is in range [1.000, 1.000] for payload LHKP1EPU1PM, values [1.00, 1.00, 1.00] (starting with index:0, margin:0)

epuPwrMgt: Dwell telemetry for payload LHKP1EPU1PM are within [1.000, 1.000]

pduVoltage: Checking if dwell telemetry is in range [0.000, 6.000] for payload L_DAQ_R_PDU_V, values [3.38, 3.36, 3.35, 3.35, 3.32, 3.36, 3.36, 3.36, 3.35, 3.41, 3.36, 3.35, 3.35, 3.32, 3.36, 3.37, 3.35, 3.36, 3.35, 3.35, 3.35, 3.35, 3.36, 3.36, 3.36, 3.35, 3.36, 3.36, 3.33, 3.35] (starting with index:0, margin:0)

pduVoltage: Dwell telemetry for payload L_DAQ_R_PDU_V are within [0.000, 6.000]

epuTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKP1EPU1T, values [27.83, 27.87, 27.83] (starting with index:0, margin:0)

epuTemp: Dwell telemetry for payload LHKP1EPU1T are within [-30.000, 45.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC5T0, values [30.87, 30.87, 30.87, 30.83] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC5T0 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC5T1, values [-114.72, -114.72, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC5T1 are within [-123.000, 40.000]

tkr25VA: Checking if dwell telemetry is in range [0.000, 3.000] for payload LHKT0TKR25VAB, values [2.56, 2.56, 2.56, 2.56] (starting with index:0, margin:0)

tkr25VA: Dwell telemetry for payload LHKT0TKR25VAB are within [0.000, 3.000]

siuFeedCurrent: Checking if dwell telemetry is in range [-1.000, 20.000] for payload VSC_RBPU_SIU_C, values [0.55, 0.50, 0.55, 0.54, 0.56, 0.54, 0.55, 0.52, 0.55, 0.57, 0.58, 0.55, 0.57, 0.58, 0.56, 0.54, 0.55, 0.57, 0.58, 0.57, 0.54, 0.54, 0.55, 0.56, 0.54, 0.59, 0.58, 0.54, 0.54, 0.55] (starting with index:0, margin:0)

siuFeedCurrent: Dwell telemetry for payload VSC_RBPU_SIU_C are within [-1.000, 20.000]

epuHskTlm: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKEPU0CPUJTEMP, values [51.00, 51.00, 51.00] (starting with index:0, margin:0)

epuHskTlm: Dwell telemetry for payload LHKEPU0CPUJTEMP are within [1.000, 999.000]

siuFeedVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload VSC_RBPU_SIU_V, values [28.17, 28.03, 28.17, 28.12, 28.03, 28.12, 28.08, 28.03, 28.17, 28.12, 28.12, 28.08, 28.12, 27.93, 28.12, 28.12, 28.27, 27.73, 27.88, 28.12, 27.93, 28.17, 27.93, 28.08, 27.93, 27.93, 27.98, 28.12, 28.22, 28.08] (starting with index:0, margin:0)

siuFeedVoltage: Dwell telemetry for payload VSC_RBPU_SIU_V are within [27.000, 29.000]

siuFeedVoltage: Warning: dwellOnStatus : Verification - Operator forced verification tests to pass

Reduce ACD HVBS for Free Board 0 to Minimum

: 

: 

hvbsVoltage: AEM free board 0 HV1 voltage measured as 10.13V and within the required range of [-60.0, 60.0]

hvbsVoltage: AEM free board 0 HV1 voltage measured as 10.13V and within the required range of [-60.0, 60.0]

Power Off ACD Free Board 0

: 

hvbsVoltage: AEM free board 0 HV1 voltage measured as 10.13V and within the required range of [-0.5, 80.0]

: 

gasuVoltages: AEM/EBM 3.3V voltage 3.36V is within [3.0, 3.6000000000000001]

gasuVoltages: AEM/EBM 2.5V voltage 2.53V is within [2.0, 2.6000000000000001]

freeBoardVoltage: AEM free board 0 voltage measured as 0.73V and within the required range of [-0.10000000000000001, 0.80000000000000004]

Power Off the AEM

: 

freeBoardVoltage: AEM free board 0 voltage measured as 0.73V and within the required range of [-0.10000000000000001, 0.80000000000000004]

: 

Reduce TEM 0 TKR Bias Voltage to Minimum

: 

: 

tkrBias: TEM 0 TKR bias V0 measured as 0.31V and within the required range of [0.0, 105.0]

tkrBias: TEM 0 TKR bias V1 measured as 25.84V and within the required range of [0.0, 105.0]

tkrBias: Warning: Conversion constant for LDET0TKRBIASI was not in the database, using the data from the configuration file

tkrBias: TEM 0 TKR bias current measured as -0.00A and within the required range of [-1.0, 10.0]

Power Off TEM 0 TKR

: 

: 

tkrVoltage: TEM 0 TKR 1.5V analog measured as 0.00V and within the required range of [0.0, 0.10000000000000001]

tkrVoltage: TEM 0 TKR 2.5V digital measured as 0.00V and within the required range of [0.0, 0.10000000000000001]

tkrVoltage: TEM 0 TKR 2.5V analog measured as 0.01V and within the required range of [0.0, 0.10000000000000001]

Reduce TEM 0 CAL Bias Voltage to Minimum

: 

: 

calBias: TEM 0 CAL bias V0 measured as 73.99V and within the required range of [0.0, 80.0]

calBias: TEM 0 CAL bias V1 measured as 78.62V and within the required range of [0.0, 80.0]

calBias: Warning: Conversion constant for LDET0CALBIASI was not in the database, using the data from the configuration file

calBias: TEM 0 CAL bias current measured as 0.00A and within the required range of [-1.0, 10.0]

Power Off TEM 0 CAL

: 

: 

cal33V: TEM 0 CAL 3.3V digital measured as 0.00V and within the required range of [0.0, 0.10000000000000001]

cal33V: TEM 0 CAL 3.3V analog measured as 0.01V and within the required range of [0.0, 0.10000000000000001]

Power Off TEM 0

: 

: 

temVoltage: TEM 0 3.3V voltage measured as 1.14V and within the required range of [0.0, 2.0]

Power Off EPU 1

: 

: 

epuVoltage: PDU 1 EPU 1 3.3V voltage measured as 0.08V and within the required range of [0.0, 0.5]

Power Off EPU 0

: 

: 

epuVoltage: PDU 1 EPU 0 3.3V voltage measured as 0.08V and within the required range of [0.0, 0.5]

Power Off GASU and PDU

: 

: 

Ambient, Average and Peak Power Consumption

: 

: 

ambientPower: LAT input power measured as 7.31W and within the required range of [0, 750]

averagePower: LAT average input power measured as 11.02W and within the required range of [0, 650]