LAT01x - LAT Power Off Sequence Test [101000045]

LatPowerOff LAT01x - LAT Power Off Sequence Test

Mon Mar 6 19:17:34 2006

Test Summary

Configuration file: tbLatPowerOff.cfg

Configuration file version: 1.6

Configuration file release: L00-09-00

Run Id: 101000045

Run Report: online-v2r4p0_101000045_rcReport_rcReport.xml

Start Up Step	Prerequisite	Verification
Check if the LAT is Powered On	PASSED	PASSED
Reduce ACD HVBS for Free Board 0 to Minimum	PASSED	PASSED
Power Off ACD Free Board 0	PASSED	PASSED
Power Off the AEM	PASSED	PASSED
Reduce TEM 0 TKR Bias Voltage to Minimum	PASSED	PASSED
Power Off TEM 0 TKR	PASSED	PASSED
Reduce TEM 0 CAL Bias Voltage to Minimum	PASSED	PASSED
Power Off TEM 0 CAL	PASSED	PASSED
Power Off TEM 0	PASSED	PASSED
Power Off EPU 1	PASSED	PASSED
Power Off EPU 0	PASSED	PASSED
Power Off GASU and PDU	PASSED	PASSED
Ambient, Average and Peak Power Consumption	PASSED	PASSED

Completion Status: PASSED

Check if the LAT is Powered On

Prerequisite:

Verification:

freeBoardCurrent: Checking if dwell telemetry is in range [-1.000, 10.000] for payload LHKAFR33ISUM, values [0.00, 0.00, 0.00, 0.00] (starting with index:0, margin:0)

freeBoardCurrent: Dwell telemetry for payload LHKAFR33ISUM are within [-1.000, 10.000]

cal33VA: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKT0CAL33VA, values [3.38, 3.38, 3.38] (starting with index:0, margin:0)

cal33VA: Dwell telemetry for payload LHKT0CAL33VA are within [3.000, 3.500]

calBiasVoltage: Checking if dwell telemetry is in range [0.000, 80.000] for payload LHKT0CALBSV0, values [0.25, 0.25, 0.31] (starting with index:0, margin:0)

calBiasVoltage: Dwell telemetry for payload LHKT0CALBSV0 are within [0.000, 80.000]

calBiasVoltage: Checking if dwell telemetry is in range [0.000, 80.000] for payload LHKT0CALBSV1, values [25.28, 25.40, 25.34] (starting with index:0, margin:0)

calBiasVoltage: Dwell telemetry for payload LHKT0CALBSV1 are within [0.000, 80.000]

freeBoardTemp: Checking if dwell telemetry is in range [-120.000, 30.000] for payload LHKAEMFR0T, values [23.73, 23.73, 23.73, 23.73] (starting with index:0, margin:0)

freeBoardTemp: Dwell telemetry for payload LHKAEMFR0T are within [-120.000, 30.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC1T0, values [27.70, 27.66, 27.70] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC1T0 are within [-123.000, 40.000]

calAfeeTemp: Checking if dwell telemetry is in range [23.000, 40.000] for payload LHKT0CALAF1T1, values [27.77, 27.77, 27.77] (starting with index:0, margin:0)

calAfeeTemp: Dwell telemetry for payload LHKT0CALAF1T1 are within [23.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC0T1, values [-114.72, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC0T1 are within [-123.000, 40.000]

epuTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKP0EPU0T, values [26.85, 26.88, 26.88, 26.92] (starting with index:0, margin:0)

epuTemp: Dwell telemetry for payload LHKP0EPU0T are within [-30.000, 45.000]

siuVoltage: Checking if dwell telemetry is in range [0.000, 6.000] for payload L_DAQ_P_SIU_V, values [2.34, 2.32, 2.38, 2.34, 2.35, 2.34, 2.34, 2.36, 2.34, 2.38, 2.38, 2.34, 2.34, 2.42, 2.34, 2.35, 2.35, 2.34, 2.34, 2.36, 2.42, 2.34, 2.34, 2.34, 2.40, 2.40, 2.33, 2.34, 2.33, 2.35] (starting with index:0, margin:0)

siuVoltage: Dwell telemetry for payload L_DAQ_P_SIU_V are within [0.000, 6.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC6T0, values [26.68, 26.68, 26.68] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC6T0 are within [-123.000, 40.000]

siuTemp: Checking if dwell telemetry is in range [23.000, 50.000] for payload L_DAQ_P_SIU_T, values [31.59, 33.09, 32.91, 33.09, 33.00, 32.64, 31.59, 32.73, 33.36, 33.09, 33.09, 33.09, 33.18, 33.18, 31.24, 34.19, 32.64, 33.82, 33.09, 31.50, 33.00, 33.18, 33.00, 31.59, 33.00, 33.00, 33.18, 31.59, 33.00, 31.59] (starting with index:0, margin:0)

siuTemp: Dwell telemetry for payload L_DAQ_P_SIU_T are within [23.000, 50.000]

calAfeeTemp: Checking if dwell telemetry is in range [23.000, 40.000] for payload LHKT0CALAF0T1, values [27.77, 27.80, 27.80] (starting with index:0, margin:0)

calAfeeTemp: Dwell telemetry for payload LHKT0CALAF0T1 are within [23.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC3T0, values [30.21, 30.21, 30.25] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC3T0 are within [-123.000, 40.000]

temPsTemp: Checking if dwell telemetry is in range [-40.000, 60.000] for payload LHKP0TEM0PST, values [23.19, 23.19, 23.19, 23.22] (starting with index:0, margin:0)

temPsTemp: Dwell telemetry for payload LHKP0TEM0PST are within [-40.000, 60.000]

tkr25VD: Checking if dwell telemetry is in range [0.000, 3.000] for payload LHKT0TKR25VD, values [2.52, 2.52, 2.52] (starting with index:0, margin:0)

tkr25VD: Dwell telemetry for payload LHKT0TKR25VD are within [0.000, 3.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC7T0, values [27.34, 27.38, 27.38] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC7T0 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC7T1, values [-114.72, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC7T1 are within [-123.000, 40.000]

calAfeeTemp: Checking if dwell telemetry is in range [23.000, 40.000] for payload LHKT0CALAF2T1, values [26.54, 26.47, 26.47] (starting with index:0, margin:0)

calAfeeTemp: Dwell telemetry for payload LHKT0CALAF2T1 are within [23.000, 40.000]

calAfeeTemp: Checking if dwell telemetry is in range [23.000, 40.000] for payload LHKT0CALAF3T1, values [25.62, 25.62, 25.59] (starting with index:0, margin:0)

calAfeeTemp: Dwell telemetry for payload LHKT0CALAF3T1 are within [23.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC4T1, values [-114.72, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC4T1 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC2T0, values [28.60, 28.60, 28.60] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC2T0 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC4T0, values [27.59, 27.59, 27.52] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC4T0 are within [-123.000, 40.000]

epuHskTlm: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKEPU1CPUJTEMP, values [39.00, 39.00, 39.00] (starting with index:0, margin:0)

epuHskTlm: Dwell telemetry for payload LHKEPU1CPUJTEMP are within [1.000, 999.000]

epuPwrMgt: Checking if dwell telemetry is in range [1.000, 1.000] for payload LHKP0EPU1PM, values [1.00, 1.00, 1.00, 1.00] (starting with index:0, margin:0)

epuPwrMgt: Dwell telemetry for payload LHKP0EPU1PM are within [1.000, 1.000]

gasuTemp: Checking if dwell telemetry is in range [23.000, 30.000] for payload L_DAQ_P_GASU_T, values [25.41, 24.36, 25.34, 24.78, 24.78, 25.06, 24.78, 24.85, 24.22, 24.50, 24.50, 24.85, 25.06, 24.78, 24.78, 25.41, 24.85, 25.06, 25.06, 24.50, 24.85, 24.50, 25.41, 24.78, 24.50, 24.22, 25.41, 24.85, 24.85, 25.34] (starting with index:0, margin:0)

gasuTemp: Dwell telemetry for payload L_DAQ_P_GASU_T are within [23.000, 30.000]

hvbsOpsVoltage: Checking if dwell telemetry is in range [666.000, 814.000] for payload LHKAEMFR0V1, values [773.43, 773.43, 773.43, 773.43] (starting with index:0, margin:0)

hvbsOpsVoltage: Dwell telemetry for payload LHKAEMFR0V1 are within [666.000, 814.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC6T1, values [-114.72, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC6T1 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC2T1, values [-114.72, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC2T1 are within [-123.000, 40.000]

epuVoltage: Checking if dwell telemetry is in range [2.000, 3.500] for payload LHKP0EPU033V, values [2.25, 2.25, 2.25, 2.25] (starting with index:0, margin:0)

epuVoltage: Dwell telemetry for payload LHKP0EPU033V are within [2.000, 3.500]

gasu33V: Checking if dwell telemetry is in range [3.000, 3.600] for payload L_DAQ_P_EBM33V, values [3.35, 3.32, 3.34, 3.35, 3.28, 3.29, 3.35, 3.35, 3.28, 3.32, 3.35, 3.28, 3.35, 3.34, 3.34, 3.33, 3.32, 3.36, 3.35, 3.29, 3.38, 3.32, 3.34, 3.27, 3.28, 3.35, 3.34, 3.34, 3.31, 3.35] (starting with index:0, margin:0)

gasu33V: Dwell telemetry for payload L_DAQ_P_EBM33V are within [3.000, 3.600]

daqFeedVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload VSC_RBPU_DAQ_V, values [27.78, 27.93, 27.73, 27.93, 27.73, 28.17, 27.93, 28.08, 27.73, 28.12, 27.69, 27.73, 28.03, 27.93, 27.78, 27.93, 28.08, 27.98, 28.03, 28.03, 28.03, 28.08, 28.27, 27.73, 28.08, 28.08, 27.73, 27.93, 28.08, 27.93] (starting with index:0, margin:0)

daqFeedVoltage: Dwell telemetry for payload VSC_RBPU_DAQ_V are within [27.000, 29.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC3T1, values [-114.72, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC3T1 are within [-123.000, 40.000]

temDaqTemp: Checking if dwell telemetry is in range [-40.000, 60.000] for payload LHKP0TEM0PCT, values [26.37, 26.37, 26.37, 26.41] (starting with index:0, margin:0)

temDaqTemp: Dwell telemetry for payload LHKP0TEM0PCT are within [-40.000, 60.000]

cal33VD: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKT0CAL33VD, values [3.36, 3.36, 3.36] (starting with index:0, margin:0)

cal33VD: Dwell telemetry for payload LHKT0CAL33VD are within [3.000, 3.500]

freeBoardVoltage: Checking if dwell telemetry is in range [0.000, 29.000] for payload LHKAEMFR0VD, values [3.48, 3.48, 3.48, 3.48] (starting with index:0, margin:0)

freeBoardVoltage: Dwell telemetry for payload LHKAEMFR0VD are within [0.000, 29.000]

pduVoltage: Checking if dwell telemetry is in range [0.000, 6.000] for payload L_DAQ_P_PDU_V, values [3.36, 3.36, 3.36, 3.36, 3.32, 3.36, 3.37, 3.35, 3.33, 3.40, 3.35, 3.36, 3.36, 3.35, 3.32, 3.39, 3.33, 3.36, 3.38, 3.37, 3.39, 3.36, 3.35, 3.32, 3.36, 3.36, 3.32, 3.36, 3.36, 3.36] (starting with index:0, margin:0)

pduVoltage: Dwell telemetry for payload L_DAQ_P_PDU_V are within [0.000, 6.000]

epuPwrMgt: Checking if dwell telemetry is in range [1.000, 1.000] for payload LHKP0EPU0PM, values [1.00, 1.00, 1.00, 1.00] (starting with index:0, margin:0)

epuPwrMgt: Dwell telemetry for payload LHKP0EPU0PM are within [1.000, 1.000]

epuVoltage: Checking if dwell telemetry is in range [2.000, 3.500] for payload LHKP0EPU133V, values [2.26, 2.26, 2.26, 2.26] (starting with index:0, margin:0)

epuVoltage: Dwell telemetry for payload LHKP0EPU133V are within [2.000, 3.500]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC1T1, values [-108.07, -108.07, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC1T1 are within [-123.000, 40.000]

epuTemp: Checking if dwell telemetry is in range [-30.000, 45.000] for payload LHKP0EPU1T, values [25.51, 25.51, 25.55, 25.51] (starting with index:0, margin:0)

epuTemp: Dwell telemetry for payload LHKP0EPU1T are within [-30.000, 45.000]

gasu25V: Checking if dwell telemetry is in range [2.000, 2.600] for payload L_DAQ_P_EBM25V, values [2.48, 2.46, 2.53, 2.50, 2.50, 2.51, 2.43, 2.48, 2.46, 2.44, 2.46, 2.50, 2.43, 2.46, 2.43, 2.42, 2.49, 2.50, 2.43, 2.48, 2.48, 2.49, 2.53, 2.53, 2.46, 2.44, 2.42, 2.43, 2.50, 2.44] (starting with index:0, margin:0)

gasu25V: Dwell telemetry for payload L_DAQ_P_EBM25V are within [2.000, 2.600]

gasu25V: Checking if dwell telemetry is in range [2.000, 2.600] for payload L_DAQ_P_GEM25V, values [2.49, 2.46, 2.46, 2.47, 2.45, 2.46, 2.45, 2.48, 2.44, 2.48, 2.48, 2.48, 2.48, 2.50, 2.52, 2.46, 2.46, 2.49, 2.50, 2.46, 2.49, 2.45, 2.46, 2.48, 2.46, 2.47, 2.47, 2.46, 2.45, 2.48] (starting with index:0, margin:0)

gasu25V: Dwell telemetry for payload L_DAQ_P_GEM25V are within [2.000, 2.600]

gasu33V: Checking if dwell telemetry is in range [3.000, 3.600] for payload L_DAQ_P_GEM33V, values [3.35, 3.28, 3.30, 3.26, 3.28, 3.30, 3.28, 3.28, 3.33, 3.29, 3.28, 3.34, 3.32, 3.29, 3.32, 3.32, 3.32, 3.30, 3.27, 3.29, 3.33, 3.32, 3.28, 3.30, 3.28, 3.35, 3.32, 3.31, 3.34, 3.32] (starting with index:0, margin:0)

gasu33V: Dwell telemetry for payload L_DAQ_P_GEM33V are within [3.000, 3.600]

temVoltage: Checking if dwell telemetry is in range [3.000, 3.500] for payload LHKT0TEM33V, values [3.40, 3.40, 3.40] (starting with index:0, margin:0)

temVoltage: Dwell telemetry for payload LHKT0TEM33V are within [3.000, 3.500]

daqFeedCurrent: Checking if dwell telemetry is in range [-1.000, 20.000] for payload VSC_RBPU_DAQ_C, values [2.73, 2.54, 2.34, 2.69, 2.29, 2.44, 2.69, 2.34, 2.54, 2.39, 2.59, 2.64, 2.39, 2.34, 2.29, 2.49, 2.44, 2.34, 2.29, 2.10, 2.00, 2.34, 2.34, 2.54, 2.34, 2.34, 2.54, 2.69, 2.29, 2.78] (starting with index:0, margin:0)

daqFeedCurrent: Dwell telemetry for payload VSC_RBPU_DAQ_C are within [-1.000, 20.000]

tkrBiasVoltage: Checking if dwell telemetry is in range [0.000, 100.000] for payload LHKT0TKRBV1, values [25.77, 25.84, 25.77] (starting with index:0, margin:0)

tkrBiasVoltage: Dwell telemetry for payload LHKT0TKRBV1 are within [0.000, 100.000]

tkrBiasVoltage: Checking if dwell telemetry is in range [0.000, 100.000] for payload LHKT0TKRBV0, values [0.31, 0.31, 0.31] (starting with index:0, margin:0)

tkrBiasVoltage: Dwell telemetry for payload LHKT0TKRBV0 are within [0.000, 100.000]

tkr15VA: Checking if dwell telemetry is in range [0.000, 2.000] for payload LHKT0TKR15VAA, values [1.43, 1.43, 1.43] (starting with index:0, margin:0)

tkr15VA: Dwell telemetry for payload LHKT0TKR15VAA are within [0.000, 2.000]

siuFeedCurrent: Checking if dwell telemetry is in range [-1.000, 20.000] for payload VSC_RBPU_SIU_C, values [0.71, 0.69, 0.70, 0.72, 0.71, 0.68, 0.70, 0.70, 0.66, 0.72, 0.72, 0.71, 0.70, 0.70, 0.67, 0.74, 0.70, 0.70, 0.70, 0.73, 0.73, 0.70, 0.70, 0.72, 0.71, 0.70, 0.70, 0.72, 0.70, 0.70] (starting with index:0, margin:0)

siuFeedCurrent: Dwell telemetry for payload VSC_RBPU_SIU_C are within [-1.000, 20.000]

temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V0, values [27.54, 27.55, 27.54] (starting with index:0, margin:0)

temPsVoltage: Dwell telemetry for payload LHKT0TEM28V0 are within [27.000, 29.000]

pduTemp: Checking if dwell telemetry is in range [23.000, 50.000] for payload L_DAQ_P_PDU_T, values [23.20, 23.27, 23.13, 23.40, 23.27, 23.67, 23.74, 24.01, 24.36, 24.01, 24.29, 23.74, 23.47, 23.61, 23.20, 24.01, 23.27, 23.74, 23.74, 24.15, 23.13, 24.29, 24.29, 23.27, 23.47, 23.74, 24.29, 23.74, 23.81, 23.74] (starting with index:0, margin:0)

pduTemp: Dwell telemetry for payload L_DAQ_P_PDU_T are within [23.000, 50.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC0T0, values [28.20, 28.20, 28.20] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC0T0 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC5T0, values [28.86, 28.89, 28.89] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC5T0 are within [-123.000, 40.000]

tkrTemp: Checking if dwell telemetry is in range [-123.000, 40.000] for payload LHKT0TKRC5T1, values [-114.72, -114.72, -114.72] (starting with index:0, margin:0)

tkrTemp: Dwell telemetry for payload LHKT0TKRC5T1 are within [-123.000, 40.000]

tkr25VA: Checking if dwell telemetry is in range [0.000, 3.000] for payload LHKT0TKR25VAB, values [2.56, 2.56, 2.56] (starting with index:0, margin:0)

tkr25VA: Dwell telemetry for payload LHKT0TKR25VAB are within [0.000, 3.000]

temPsVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload LHKT0TEM28V1, values [27.77, 27.78, 27.77] (starting with index:0, margin:0)

temPsVoltage: Dwell telemetry for payload LHKT0TEM28V1 are within [27.000, 29.000]

epuHskTlm: Checking if dwell telemetry is in range [1.000, 999.000] for payload LHKEPU0CPUJTEMP, values [43.00, 43.00, 43.00] (starting with index:0, margin:0)

epuHskTlm: Dwell telemetry for payload LHKEPU0CPUJTEMP are within [1.000, 999.000]

siuFeedVoltage: Checking if dwell telemetry is in range [27.000, 29.000] for payload VSC_RBPU_SIU_V, values [28.08, 28.12, 28.47, 27.93, 28.08, 28.17, 28.12, 28.12, 28.37, 28.12, 28.12, 28.12, 28.47, 28.17, 28.12, 27.93, 28.12, 27.98, 27.93, 28.12, 28.03, 28.12, 28.03, 28.27, 28.08, 28.27, 27.98, 28.12, 28.03, 28.08] (starting with index:0, margin:0)

siuFeedVoltage: Dwell telemetry for payload VSC_RBPU_SIU_V are within [27.000, 29.000]

Reduce ACD HVBS for Free Board 0 to Minimum

Prerequisite:

Verification:

hvbsVoltage: AEM free board 0 HV1 voltage measured as 10.13V and within the required range of [-60.0, 60.0]

Power Off ACD Free Board 0

Prerequisite:

hvbsVoltage: AEM free board 0 HV1 voltage measured as 10.13V and within the required range of [-0.5, 80.0]

Verification:

gasuVoltages: AEM/EBM 3.3V voltage 3.34V is within [3.0, 3.6000000000000001]

gasuVoltages: AEM/EBM 2.5V voltage 2.42V is within [2.0, 2.6000000000000001]

freeBoardVoltage: AEM free board 0 voltage measured as 0.73V and within the required range of [0.0, 29.0]

Power Off the AEM

Prerequisite:

freeBoardVoltage: AEM free board 0 voltage measured as 0.73V and within the required range of [-0.10000000000000001, 0.80000000000000004]

Verification:

Reduce TEM 0 TKR Bias Voltage to Minimum

Prerequisite:

Verification:

tkrBias: TEM 0 TKR bias V0 measured as 0.31V and within the required range of [0.0, 100.0]

tkrBias: TEM 0 TKR bias V1 measured as 25.90V and within the required range of [0.0, 100.0]

tkrBias: Warning: Conversion constant for LDET0TKRBIASI was not in the database, using the data from the configuration file

tkrBias: TEM 0 TKR bias current measured as -0.00A and within the required range of [-1.0, 10.0]

Power Off TEM 0 TKR

Prerequisite:

Verification:

tkrVoltage: TEM 0 TKR 1.5V analog measured as 0.00V and within the required range of [0.0, 0.10000000000000001]

tkrVoltage: TEM 0 TKR 2.5V digital measured as 0.00V and within the required range of [0.0, 0.10000000000000001]

tkrVoltage: TEM 0 TKR 2.5V analog measured as 0.01V and within the required range of [0.0, 0.10000000000000001]

Reduce TEM 0 CAL Bias Voltage to Minimum

Prerequisite:

Verification:

calBias: TEM 0 CAL bias V0 measured as 0.25V and within the required range of [0.0, 80.0]

calBias: TEM 0 CAL bias V1 measured as 25.65V and within the required range of [0.0, 80.0]

calBias: TEM 0 CAL bias current measured as 0.01A and within the required range of [-1.0, 10.0]

Power Off TEM 0 CAL

Prerequisite:

Verification:

cal33V: TEM 0 CAL 3.3V digital measured as 0.00V and within the required range of [0.0, 0.10000000000000001]

cal33V: TEM 0 CAL 3.3V analog measured as 0.01V and within the required range of [0.0, 0.10000000000000001]

Power Off TEM 0

Prerequisite:

Verification:

temVoltage: TEM 0 3.3V voltage measured as 1.13V and within the required range of [0.0, 2.0]

Power Off EPU 1

Prerequisite:

Verification:

epuVoltage: PDU 0 EPU 1 3.3V voltage measured as 0.20V and within the required range of [0.0, 0.5]

Power Off EPU 0

Prerequisite:

Verification:

epuVoltage: PDU 0 EPU 0 3.3V voltage measured as 0.22V and within the required range of [0.0, 0.5]

Power Off GASU and PDU

Prerequisite:

Verification:

Ambient, Average and Peak Power Consumption

Prerequisite:

Verification:

ambientPower: LAT input power measured as 21.98W and within the required range of [0, 750]

averagePower: LAT average input power measured as 17.42W and within the required range of [0, 650]

peakPower: LAT peak input power measured as 24.70W and within the required range of [0, 750]