:
:
:
:
:
:
:
:
:
:
:
:
:
|
|
|
|
|---|---|---|
|
|
|
|
|
|
|
|
:
:
Do Physics Transitions
transition from QUIESCENT to PHYSICS mode
packet dump: see id 0x3c: The configuration of the high-voltage interface changed
packet dump: see id 0x15: LIM configured the LAT instrument for non-SAA operation
packet dump: see id 0x2b: LIM sent an 'idle' command to the LPA task
packet dump: see id 0x2b: LIM sent an 'idle' command to the LPA task
packet dump: see id 0x2c: The virtual mode changed
packet dump: see id 0x2: The operating mode changed
packet dump: see id 0xd: LIM sent the Physics-Start command to the LPA task
packet dump: see id 0x23: LIM changed the state of the LPA task
packet dump: see id 0x2c: The virtual mode changed
packet dump: see id 0x3f: LIM received a status code for a Physics-Start command that it sent to the LPA task
Verified LIM configured the LAT instrument for non-SAA operation
Verified The configuration of the high-voltage interface changed
Observed expected transition from QUIESCENT to PHYSICS mode
transition from PHYSICS to PHYSICS-SAA mode
packet dump: see id 0x2d: The SAA transit state changed
packet dump: see id 0xf: LIM sent the Physics-Stop command to the LPA task
packet dump: see id 0x23: LIM changed the state of the LPA task
packet dump: see id 0x13: LIM configured the LAT instrument for SAA transit
packet dump: see id 0x42: LIM received a status code for a Physics-Stop command that it sent to the LPA task
packet dump: see id 0x20: LIM received the Physics-Complete command from the LPA task
packet dump: see id 0x23: LIM changed the state of the LPA task
packet dump: see id 0x2: The operating mode changed
Verified LIM configured the LAT instrument for SAA transit
Observed expected transition from PHYSICS to PHYSICS-SAA mode
transition from PHYSICS-SAA to TOO-SAA mode
Observed expected transition from PHYSICS-SAA to TOO-SAA mode
transition from TOO-SAA to PHYSICS-SAA mode
Observed expected transition from TOO-SAA to PHYSICS-SAA mode
transition from PHYSICS-SAA to PHYSICS mode
packet dump: see id 0x2d: The SAA transit state changed
packet dump: see id 0x15: LIM configured the LAT instrument for non-SAA operation
packet dump: see id 0x2: The operating mode changed
packet dump: see id 0x2e: LIM called the LPA_resume() function to restart an observation
packet dump: see id 0x23: LIM changed the state of the LPA task
Verified LIM configured the LAT instrument for non-SAA operation
Observed expected transition from PHYSICS-SAA to PHYSICS mode
transition to HOLD mode
Observed expected transition to HOLD mode
transition from QUIESCENT to PHYSICS mode
Observed expected transition from QUIESCENT to PHYSICS mode
transition from PHYSICS to QUIESCENT mode
Observed expected transition from PHYSICS to QUIESCENT mode
transition from QUIESCENT to PHYSICS mode
Observed expected transition from QUIESCENT to PHYSICS mode
transition from PHYSICS to PHYSICS-SAA mode
Observed expected transition from PHYSICS to PHYSICS-SAA mode
transition to HOLD mode
Observed expected transition to HOLD mode
transition from QUIESCENT to PHYSICS-SAA mode
Observed expected transition from QUIESCENT to PHYSICS-SAA mode
transition from PHYSICS-SAA to QUIESCENT mode
Observed expected transition from PHYSICS-SAA to QUIESCENT mode
transition from QUIESCENT to PHYSICS-SAA mode
Observed expected transition from QUIESCENT to PHYSICS-SAA mode
transition from PHYSICS-SAA to QUIESCENT mode
Observed expected transition from PHYSICS-SAA to QUIESCENT mode
transition from QUIESCENT to PHYSICS mode
Observed expected transition from QUIESCENT to PHYSICS mode
transition from PHYSICS to TOO mode
Observed expected transition from PHYSICS to TOO mode
transition from TOO to PHYSICS mode
Observed expected transition from TOO to PHYSICS mode
transition from PHYSICS to QUIESCENT mode
Observed expected transition from PHYSICS to QUIESCENT mode
Do simple ARR transition
Configure GBM
transition from QUIESCENT to PHYSICS mode
Observed expected transition from QUIESCENT to PHYSICS mode
Verified received primary GBM interrupt: LIM received an interrupt on the primary GBM interrupt signal.
Verified state LIMTARRREADY has expected value 0x1 for id 0x25: The ARR observation state changed
Verified state LIMTARRGRBSTATE has expected value 0x4 for id 0x25: The ARR observation state changed
Verified state LIMTOPMODE has expected value 0x8 for id 0x2: The operating mode changed
Verified changed observation mode: LIM called the LPA_set_mode() function to change the observation mode.
sending calc info
Verified received GBM CALCINFO signal: LIM received a GBM Calculated Information command.
Verified received GBM command: LIM forwarded a GBM command to the LPA task.
transition to ARR mode
Received telecommand sent by the LAT: apid=1536, fcode=2
Received telecommand LIMSCSLEWREQUEST:
payload LIMSCSUBSECONDS, value 41507
payload LIMSCSECONDS, value 180559256
payload LIMSCRA, value 1.23399996758
payload LIMSCDWELLTIME, value 60
payload LIMSCTRANID, value 0
payload LIMSCDEC, value 2.34500002861
Verified saw repoint request telecmd/telemetry
packet dump: see id 0x2f: LIM received a GBM Candidate Repoint Recommendation command which recommended a repoint
packet dump: see id 0x31: LIM forwarded a GBM command to the LPA task
packet dump: see id 0x32: LIM sent a Slew-Request command to the spacecraft
packet dump: see id 0x47: The repoint request PENDING status changed
Verified received Send Slew Req: LIM sent a Slew-Request command to the spacecraft.
Verified saw Rep Req state change: The repoint request PENDING status changed.
Verified received slew accept: LIM received a Slew-Request-Reply from the spacecraft which indicated that the request was accepted.
Verified state LIMTARRREADY has expected value 0x1 for id 0x25: The ARR observation state changed
Verified state LIMTARRGRBSTATE has expected value 0x5 for id 0x25: The ARR observation state changed
Verified changed observation mode: LIM called the LPA_set_mode() function to change the observation mode.
Observed expected transition to ARR mode
transition from ARR to PHYSICS mode
Observed expected transition from ARR to PHYSICS mode
Verified received GBM closeout: LIM received a GBM Closeout command.
Verified enabled GBM primary interrupt: LIM enabled the primary GBM interrupt signal.
Verified received GBM command: LIM forwarded a GBM command to the LPA task.
Verified state LIMTARRGRBSTATE has expected value 0x6 for id 0x25: The ARR observation state changed
transition from PHYSICS to QUIESCENT mode
Observed expected transition from PHYSICS to QUIESCENT mode
Do ARR Transitions
Configure GBM
transition from QUIESCENT to PHYSICS mode
Observed expected transition from QUIESCENT to PHYSICS mode
Verified received primary GBM interrupt: LIM received an interrupt on the primary GBM interrupt signal.
Verified state LIMTARRREADY has expected value 0x1 for id 0x25: The ARR observation state changed
Verified state LIMTARRGRBSTATE has expected value 0x4 for id 0x25: The ARR observation state changed
Verified state LIMTOPMODE has expected value 0x8 for id 0x2: The operating mode changed
Verified changed observation mode: LIM called the LPA_set_mode() function to change the observation mode.
sending calc info
Verified received GBM CALCINFO signal: LIM received a GBM Calculated Information command.
Verified received GBM command: LIM forwarded a GBM command to the LPA task.
transition to ARR mode
Received telecommand sent by the LAT: apid=1536, fcode=2
Received telecommand LIMSCSLEWREQUEST:
payload LIMSCSUBSECONDS, value 41498
payload LIMSCSECONDS, value 180559361
payload LIMSCRA, value 1.23399996758
payload LIMSCDWELLTIME, value 60
payload LIMSCTRANID, value 0
payload LIMSCDEC, value 2.34500002861
Verified saw repoint request telecmd/telemetry
packet dump: see id 0x2f: LIM received a GBM Candidate Repoint Recommendation command which recommended a repoint
packet dump: see id 0x31: LIM forwarded a GBM command to the LPA task
packet dump: see id 0x32: LIM sent a Slew-Request command to the spacecraft
packet dump: see id 0x47: The repoint request PENDING status changed
Verified received Send Slew Req: LIM sent a Slew-Request command to the spacecraft.
Verified saw Rep Req state change: The repoint request PENDING status changed.
Verified received slew accept: LIM received a Slew-Request-Reply from the spacecraft which indicated that the request was accepted.
Verified state LIMTARRREADY has expected value 0x1 for id 0x25: The ARR observation state changed
Verified state LIMTARRGRBSTATE has expected value 0x5 for id 0x25: The ARR observation state changed
Verified changed observation mode: LIM called the LPA_set_mode() function to change the observation mode.
Observed expected transition to ARR mode
transition from ARR to TOO mode
Observed expected transition from ARR to TOO mode
transition from TOO to ARR mode
Observed expected transition from TOO to ARR mode
transition from ARR to ARR-SAA mode
Observed expected transition from ARR to ARR-SAA mode
transition from ARR-SAA to TOO-SAA mode
Observed expected transition from ARR-SAA to TOO-SAA mode
transition from TOO-SAA to ARR-SAA mode
Observed expected transition from TOO-SAA to ARR-SAA mode
transition from ARR-SAA to ARR mode
Observed expected transition from ARR-SAA to ARR mode
transition from ARR to PHYSICS mode
Observed expected transition from ARR to PHYSICS mode
Verified received GBM closeout: LIM received a GBM Closeout command.
Verified enabled GBM primary interrupt: LIM enabled the primary GBM interrupt signal.
Verified received GBM command: LIM forwarded a GBM command to the LPA task.
transition from PHYSICS to QUIESCENT mode
Observed expected transition from PHYSICS to QUIESCENT mode
Do TOO Transitions
transition from QUIESCENT to TOO mode
Observed expected transition from QUIESCENT to TOO mode
transition from TOO to TOO-SAA mode
Observed expected transition from TOO to TOO-SAA mode
transition from TOO-SAA to TOO mode
Observed expected transition from TOO-SAA to TOO mode
transition from TOO to QUIESCENT mode
Observed expected transition from TOO to QUIESCENT mode
transition from QUIESCENT to TOO-SAA mode
Observed expected transition from QUIESCENT to TOO-SAA mode
transition from TOO-SAA to QUIESCENT mode
Observed expected transition from TOO-SAA to QUIESCENT mode
:
:
Induce fake ACD HVBS anomaly
Observe expected alert telemetry
Clear ACD alert telemetry
Have cleared alert telemetry
: