Hardware Configuration

Preset Configuration: 1

SIU Cross Strapping: AA

DAQ Cross Strapping: AA

DAQ Feed: Primary

SIU: Primary

GASU: Primary

EPU-A: 0

EPU-B: 1

ACD HVBS: 1

PDU: Primary

Test Summary

Configuration file: tbLatPowerOffTurbo.cfg

Configuration file version: 1.1

Configuration file release: L00-26-00

Run Id: 556000651

Run Report: 556000651_rcReport.xml

Start Up Step	Prerequisite	Verification
Send Load Shed Command	PASSED	PASSED
Send Discrete Reset	DISABLED	DISABLED

Completion Status: PASSED

Prerequisite:

daqCurrent: DAQ Feed Current measured as 15.23 and within the required range of [3.0, 20.0]

Send Load Shed: LAT emitted Load Shed Alert Diagnostic at 1.43061184883

Verification:

pduVoltage: Warning: PDU 0 Voltage measured as 3.42 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.40 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.36 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.35 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.36 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.32 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.31 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.36 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 0.62 which is not within the required range of [-0.5, 0.5]

pduVoltage: PDU 0 Voltage measured as 0.04 and within the required range of [-0.5, 0.5]

pduVoltage: Load has been Shed in 12.0017127991 seconds

siuPrimaryBoot: SIU Boot Type value is 'Commanded Start' which is one of the allowed values ['Commanded Start', 'Exception Start']

siuPrimaryBoot: SIU in primary boot 12.9671998024 seconds after load shed.