LAT13x: LAT-SC Load Shed/Reset Interface Test [556000494]

 

 

 

 

 

 

 

LatScLoadShedInterface
LAT13x: LAT-SC Load Shed/Reset Interface Test

Fri Apr 21 22:49:01 2006

 

 

 

 

 

 

 

Hardware Configuration

:  AA

:  AA

:  Primary

:  Primary

:  Primary

:  0

:  1

:  1

:  Primary

Test Summary

:  LatScInterface.cfg

:  1.1

:  L00-19-06

:  556000494

:  556000494_rcReport.xml

Start Up Step Prerequisite Verification
Send Load Shed Command PASSED PASSED
Send Discrete Reset PASSED PASSED

:  PASSED

Send Load Shed Command

: 

daqCurrent: DAQ Feed Current measured as 16.21 and within the required range of [3.0, 20.0]

Send Load Shed: LAT emitted Load Shed Alert Diagnostic at 1.67827701569

: 

pduVoltage: Warning: PDU 0 Voltage measured as 3.40 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.39 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.36 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.31 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.34 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.37 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.32 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.32 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.36 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 3.34 which is not within the required range of [-0.5, 0.5]

pduVoltage: Warning: PDU 0 Voltage measured as 0.63 which is not within the required range of [-0.5, 0.5]

pduVoltage: PDU 0 Voltage measured as -0.00 and within the required range of [-0.5, 0.5]

pduVoltage: Load has been Shed in 12.0064868927 seconds

siuPrimaryBoot: SIU Boot Type value is 'Exception Start' which is one of the allowed values ['Commanded Start', 'Exception Start']

siuPrimaryBoot: SIU in primary boot 12.9728138447 seconds after load shed.

Send Discrete Reset

: 

siuPrimaryBoot: SIU Boot Type value is 'Exception Start' which is one of the allowed values ['Commanded Start', 'Exception Start']

: 

siuPrimaryBoot: SIU Boot Type value is 'Cold Start' which is one of the allowed values ['Cold Start']

siuPrimaryBoot: SIU in primary boot 35.004171133 seconds after reset.