• Fred:
  • Plans for upcoming October test (see last presentation at Sc Ops meeting pdf)
  • Plans for quenching model
• Zach: Status of 4-range calDigi and GCR calibGenCAL
  • Will review CAL Digi and calibGenCAL mods next meeting
• Dave Smith: 
  • Discussion of CAL parameter monitoring and CAL paper:  here are 4 slides. 

1. Some OktoberTest tasks we're preparing, CAL related and not. 
2. The next two concern adding monitoring quantities similar to what I used to do, and Fred and Eric N too, during I&T (see http://www-glast.slac.stanford.edu/IntegrationTest/SVAC/Instrument_Analysis/Workshop-6/agenda.htm if you don't know what we used to do). The intent is that this will overflow directly to a discussion of who intends to make which CAL plots for Ops Sim 1 (a.k.a. OktoberTest).
3. The last one concerns the status of the CAL paper and possibilities for moving forward. 

• Ping: Status of dE/dx work

Notes:

• Zach and Fred will coordinate to run calibGenCAL on Oktobertest data
• Elliot has labor to contribute to CAL calibration effort where needed
• (Post-meeting) CAL calibration (i.e. MeVperDAC, asym, etc) will not be done as part of Oktobertest due to short on-orbit duration
• Mark will report status at next C&A meeting
• Next CAL calib meeting 9 Oct.