Panel | ||||
---|---|---|---|---|
| ||||
This page is still being updated to reflect changes in the tracker descriptions. |
This is the version of the Silicon Detector modelled as of July 23, 2005, to be used for detector studies at Snowmass.
The compact description of this detector in xml format can be found at http://www.lcsim.org/detectors/sidaug05.zip . What follows is a plain text description of the file compact.xml found in this zip file.
The tracking region is defined to be a cylinder with radius 125.5cm and z extent +/- 167.9cm.
Panel | ||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||||||||
This section is still being updated to reflect changes in the tracker descriptions. Beampipe:The beampipe is composed of three sections: a cylindrical central tube and forward and backward conical sections. Vertex Detector:The vertex detector is composed of a central barrel system with five layers and forward systems composed of four disks. The barrels are all 12.5cm long and are composed of .01cm Silicon, of which the outer .002 is sensitive. 1.4, 2.5, 3.6, 4.8, 6.0 There are four forward disks on either end, composed of a total of .03cm of silicon, of which the inner .002 is sensitive. All of the disks extend to a maximum radius of 7.5cm. The z positions and inner radii for the four disks are:
The vertex detector is supported by a Beryllium cage and surrounded by a foam cryostat. The barrel support is a cylinder 0f 0.1cm Beryllium with inner radius 7.0cm and z extent +/- 6.5cm. The barrel cryostat is a cylinder 0f 1.5cm PolystyreneFoam with inner radius 11.2cm and z extent +/- 23.0cm. Tracker:The tracker is composed of five barrels with five endplates. The z extent of the barrels increases with radius. Barrels:For the barrels, the support tubes are composed of .025cm CarbonFiber, 1.3cm of Rohacell31 and 0.25cm CarbonFiber.
Endcap:The forward disk supports are composed of .039cm CarbonFiber, 2.5cm Rohacell31 and 0.039cm of CarbonFiber.
|
Calorimeters:
Electromagnetic Calorimeter:
...