...
Table 1.8 |
---|
Value | Device Type | Controllable |
---|
ACSW | AC Switch | Y |
CSWH | aTCA Carrier Switch | Y |
GPIB | GPIB/LAN Gateway | Y |
RTR | Router | N |
SWH | Ethernet Switch | N |
SCOP | Scope | N |
TS | Terminal Server | Y |
UPS | Uninterruptible Power Supply | N |
WKUP | Walk-up ethernet connection | N |
ICS | Intercom System | N |
IOC | EPICS IOC | Y |
PLC | Programmable Logic Controller | Y |
PNA | Phase Noise Analyzer | Y |
PSC | Power Supply Controller | Y |
CAMR | Camera for Beam Line Optics | Y |
CRAT | Intelligent VME Crates | Y |
PC | Computer that is not an IOC | Y |
WB | Wireless Bridge | N |
Certain parameters or functions associated with a component device might be accessible from the compound device. For example, we might consider a water flow value as an independent, measurable quantity associated with a water line; it might be a transducer which produces pulses which are connected to a computer-readable counter. That value might be retrieved using a name like SCLR : IN20 : K701 : COUNT which indicates a scaler module in a VME crate in the klystron gallery at sector 20.
...
Table 1.10 |
---|
Area | Physical Location |
---|
Access Buildings |
ACR0 | Accelerator Control Room (B052) |
B005 | Building 5 |
B24 | Building 24 (development) |
B25 | Building 25 (development) |
B34 | Building 34 (development) |
B44 | Building 44 - Klystron Test Lab |
B81 | Building 81 - MMF |
B106 | Building 106 |
B106 | Building 136 |
B911 | Building 911 |
B911 | Building 911 |
B911 | Building 911 |
B921 | Building 921 |
ASTA-UED Facility Area |
AS01 | Accelerator Structure Test System |
Injector Machine Areas |
LR10 | FACET-II Laser Room (Upstairs, near sector 10) |
LR20 | LCLS Laser Room (Upstairs, near sector 20) |
LA20 | FACET Laser Room (Upstairs, near Sector 20) |
IN10 | FACET-II Injector |
IN20 | LCLS Injector |
LINAC Areas |
LI00 | LINAC Sector 0 |
LI20 | LINAC Sector 20 |
LI21 | LINAC Sector 21 |
LI22 | LINAC Sector 22 |
LI23 | LINAC Sector 23 |
LI24 | LINAC Sector 24 |
LI25 | LINAC Sector 25 |
LI26 | LINAC Sector 26 |
LI27 | LINAC Sector 27 |
LI28 | LINAC Sector 28 |
LI29 | LINAC Sector 29 |
LI30 | LINAC Sector 30 |
Beam Switch Yard |
For the entire beam switch yard area spanning from the wooden door to the Muon Shield, the device positions shall range from 100-999, consistently across all beam lines, such that the unit numbers match up in Z-position across all beam lines. |
MCC0 | Main Control Center (B005) OBSOLETE. Replaced with ACR0 |
CLTH | Copper LINAC to Hard Line |
CLTS | Copper LINAC to Soft Line |
BSYH | Beam Switch Yard Hard Line |
BSYS | Beam Switch Yard Soft Line |
BSYA | Beam Switch Yard A-Line |
SLTH | Superconducting LINAC to Hard Line |
SLTS | Superconducting LINAC to Soft Line |
SLTD | Superconducting LINAC to Dump Line |
BSYS | Beam Switch Yard South Arc |
LINAC to Undulator Machine Areas |
LTU0 | LINAC-to Undulator directly after BSY |
LTU1 | LINAC-to-Undulator Line 1 |
Undulator |
UND1 | Undulator on Line 1 |
Dump |
DMP1 | Beam Dump on Line 1 |
Photon Areas |
FEE1 | Front End Enclosure on Line 1 |
NEH1 | Near Experimental Hall on Line 1 |
XRT1 | X-Ray Tunnel on Line 1 |
FEH1 | Far Experimental Hall on Line 1 |
XTA Facility Area |
XT01 | X-Band Test Area |
Global Areas |
SYS0 | LCLS-I System |
SYS1 | FACET and FACET-II System |
SYS2 | LCLS-II System |
SYS3 | LCLS-III System |
SYS4 | NLCTA System |
SYS5 | SPEAR Systems |
SYS6 | X-Band Test Area |
SYS7 | ASTA Test Area |
SYS8 | Klystron Test Lab (B44) |
---|
SYSW | Global System West |
SYSE | Global System East |
SITE | Remote SLAC Location, not associated with a service building |
GBL0 | Global to all Machines (decommissioned) |
Special IN20 and BSY area Alarm Summary names * * Please note that these areas are special for alarms ONLY and not for general use.*
...