...
sid02
This is the version of the Silicon Detector modelled for the Letter of Intent (LOI) exercise.
The compact description of this detector in xml format can be found at http://www.lcsim.org/detectors/sid02.zip.
What follows is a plain text description of the file compact.xml found in this zip file.
...
The beampipe consists of a cylindrical central tube and forward/backward conical sections. The 0.040cm thick Beryllium central tube has an inner radius of 1.2cm and extends to |z|<6.25cm. The conical sections have a cone half-angle of 43.4mrad with an inner radius that flares from 1.2 cm at 6.25cm to 8.218cm at |z|=167.9cm. The conical sections are 0.0875Cm 0875cm thick Be for 6.25cm<|z|<37.5cm, where they transition to steel. The thickness of the steel section flares from 0.0875cm at |z|=37.5cm to 0.1992cm at |z|=167.9cm. A titanium liner on the inner surface of the beam pipe consists of a 0.0025cm thick cylinder and 0.0075cm thick conical sections.
...
Material | Thickness |
---|---|
Silicon (active) | 0.002cm |
Silicon (dead) | 0.028cm |
Carbon Fiber (25%) | 0.026cm |
Calorimeters:
Electromagnetic Calorimeter:
An x-y quarter view of the sid02 tracking detectors can be found at sid02_Tracker_QuarterView.eps
A plot of the material, expressed in percentage of a radiation length (X/X 0 ), as a function of the polar angle, can be found at sid02TrackerMaterialScan.eps
Calorimeters:
Electromagnetic Calorimeter:
This element sets the basic size and aspect ratio for the rest of the detector. The inner radius for the barrel is This element sets the basic size and aspect ratio for the rest of the detector. The inner radius for the barrel is 127cm. The aspect ratio is set to cos(theta)=0.8, meaning the inner z of the endcap EM calorimeter is at z of 168cm.
...
material | thickness |
---|---|
Tungsten | .250cm |
Silicon | .032cm |
Copper G10 | .068cm 005cm |
Silicon Kapton | .032cm 030cm |
Air | .025cm 033cm |
followed by ten layers of
material | thickness |
---|---|
Tungsten | .50cm |
Silicon | .032cm |
Copper G10 | .068cm 005cm |
Silicon Kapton | .032cm 030cm |
Air | .025cm 033cm |
There is a sensitive silicon layer before the first layer of Tungsten to provide additional electron/photon discrimination, giving a total of 31 layers of silicon readout.
The Tungsten alloy being used is TungstenDen24 (93% W, 6.1% Ni, .9% Fe) with a density of 17.8 g/cm 3 .
The endcap plug sits inside the barrel cylinder, so the barrel z extent is The endcap plug sits inside the barrel cylinder, so the barrel z extent is +/- 182.0cm.
The endcap starts at an inner radius of 26cm 20cm and extends out to 126.5cm.
Segmentation
The readout is 3.5mm square x 3.5mm square cells.
Hadron calorimeter:
The hadron calorimeter is a sampling calorimeter composed of 34 40 layers of
material | thickness | ||
---|---|---|---|
Steel | 2.0cm | G10 | 0.3cm |
PyrexGlass | 0.11cm | ||
RPCGas | 0.12cm | ||
PyrexGlass | 0.11cm | ||
G10 | 0.3cm | ||
Air | 0.16cm |
It begins immediately outside of the EM calorimeters, with the endcap plug sitting inside the barrel.
The barrel inner radius is 141.0 with a z extent of +/- 277.2cm294cm.
The endcap extends from an inner radius of 2620.0 cm 0cm to an outer radius of 140.75, inner z of 182.0.
Segmentation
The readout is 1cm x 1cm squares.
Solenoid:
The solenoid is modelled as a cylinder with an inner radius of 250cm255cm. This is larger than the outer radius of the hadron calorimeter since we will not be building a cylindrical detector, but a polygonal one (current thinking is octagonaldodecagonal). The barrel composition is as follows:
...
This is capped with disk endplates of 6cm steel from r=250cm to 332.8cm
The field is solenoidal, constant 5 Tesla along z up to half the coil thickness and -0.6 outside.
Muon System:
The muon system is implemented as a sampling calorimeter composed of 48 11 layers of :
material | thickness |
---|---|
Iron | 5.0cm |
G10 | 0.3cm |
PyrexGlass | 0.11cm |
RPCGas | 0.12cm |
PyrexGlass | 0.11cm |
Air | 0.86cm |
20cm thick Iron plates interspersed with double RPC readout.
The barrel inner radius is 333338.0cm 8cm with z extent of +/- 277cm294cm.
The endcap sits outside the barrel at an inner z of 277303.5cm 3cm and radius from 2620.0cm to 645608.0cm
The field is solenoidal, constant 5 Tesla along z up to half the coil thickness and -0.6 outside.
2cm
Segmentation
The readout is 3cm x 3cm squares.
An x-y quarter view of the sid02 calorimeters and solenoid can be found at sid02_Calorimeters_QuarterView.eps
Masks and Far Forward Detectors
This detector The far forward region is designed for the 2mr 14mr beam crossing solution so has separate incoming (inner radius 1.0cm) and outgoing (inner radius 1.5cm) beampipes. The far forward plug extends out to
is designed to fit within a radius of 25cm20cm. It starts with an electromagnetic calorimeter (LumiCal) with the same composition as the
endcap calorimeter, extending from 86.68cm 0cm out to 25cm19.5cm.
The calorimeter is backed up by a conically tapered tungsten mask, inner radius 8.68 0cm at z of 182cm,
tapering to 16cm at z of 330cm313.5cm. The outer radius is constant at 25cm15.5cm.
There is a far forward low-Z shield (10cm thick Beryllium12.39cm thick Borated polyethylene) at z of 285cm, with a 1.5 cm central aperture.282cm.
This is followed by a 50 layer silicon-tungsten calorimeter (BeamCal)at z of 295cm, with a single aperture for
both the incoming and outgoing beams, radius 2cm.
Segmentation
All the far forward electromagnetic calorimeters have 3.5mm x 3.5 mm square readout.
An x-y quarter view of the sid02 far forward region (also referred to as the machine-detector interface, or MDI) can be found at sid02_MDI_Cut.eps
For additional details, please see the xml file.