...
Running detCheck on xmlGeo v1r39p3 and v1r42
IdMap from v1r39p3 and v1r42 v1r39p3 and v1r42
The volIds for the ribbons were updated to provide for the new segments in the x top and side ribbons. The ribbon id's are formed with 6 fields (in xmlGeoDbs v1r39p3):
Wiki Markup \[0\] field = fLATObjects, value = eLATACD(=1)
Wiki Markup \[1\] field = fACDFace, value in the range \[0,4\]. The negative X face is 1, then continue counterclockwise in numbering the remaining side faces.
Wiki Markup \[2\] field = fACDCmp, value = eACDRibbon (= 41)
Wiki Markup \[3\] field = fMeasure, value = eMeasureX (resp. eMeasureY) for ribbons whose short dimension is parallel to x-axis (resp. y-axis).
Wiki Markup \[4\] field = fRibbon, values in the range \[0, 3\].
Wiki Markup \[5\] field = fSegment. Value is always 0 for side faces. For x-measuring top ribbons (whose continuation runs along \+Y and \-Y faces) range is in \[1, 5\] for normal segments under top tiles. Value = 6 for extra little pieces of ribbon behind vertical part of top bent tiles. y-measuring top ribbons are modeled with a single volume, fSegment = 1.
So, in particular, the side ribbons are /1/<face (1-4)>/41/<meas-direction>/<ribbon # (0-3>/0
For the new segments along the sides, the fSegment takes on a value of 1-7 rather than 0